Difference between revisions of "Adapter Board for Raspberry Pi/zh"
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
*'''用户接口，板间连接器J9引脚列表''' | *'''用户接口，板间连接器J9引脚列表''' | ||
| + | [[File:VeyeRaspberryPi Ultra B334.jpg|thumb|485x485px|用户接口实物图（后视图）]] | ||
{| class="wikitable" | {| class="wikitable" | ||
| − | |||
|1 | |1 | ||
| + | |GND | ||
| + | |2 | ||
|MIPI_L0_N | |MIPI_L0_N | ||
| − | |||
| − | |||
|- | |- | ||
|3 | |3 | ||
| + | |MIPI_L0_P | ||
| + | |4 | ||
|GND | |GND | ||
| − | |||
| − | |||
|- | |- | ||
|5 | |5 | ||
| + | |MIPI_L1_N | ||
| + | |6 | ||
|MIPI_L1_P | |MIPI_L1_P | ||
| − | |||
| − | |||
|- | |- | ||
|7 | |7 | ||
| + | |GND | ||
| + | |8 | ||
|MIPI_CK_N | |MIPI_CK_N | ||
| − | |||
| − | |||
|- | |- | ||
|9 | |9 | ||
| + | |MIPI_CK_P | ||
| + | |10 | ||
|GND | |GND | ||
| − | |||
| − | |||
|- | |- | ||
|11 | |11 | ||
|CN | |CN | ||
|12 | |12 | ||
| − | | | + | |CN |
|- | |- | ||
|13 | |13 | ||
| − | | | + | |GND |
|14 | |14 | ||
|CN | |CN | ||
|- | |- | ||
|15 | |15 | ||
| + | |CN | ||
| + | |16 | ||
|GND | |GND | ||
| − | |||
| − | |||
|- | |- | ||
|17 | |17 | ||
| + | |ENABLE | ||
| + | |18 | ||
|RST_TEST | |RST_TEST | ||
| − | |||
| − | |||
|- | |- | ||
|19 | |19 | ||
| + | |GND | ||
| + | |20 | ||
|Triggerln_SCL | |Triggerln_SCL | ||
| − | |||
| − | |||
|- | |- | ||
|21 | |21 | ||
| + | |TriggerOut_SDA | ||
| + | |22 | ||
|CN | |CN | ||
| − | + | |}<br /> | |
| − | |||
| − | |} | ||
*'''用户接口，板间连接器J2引脚列表''' | *'''用户接口，板间连接器J2引脚列表''' | ||
{| class="wikitable" | {| class="wikitable" | ||
| − | |||
|1 | |1 | ||
| + | |GND | ||
| + | |2 | ||
|MIPI_L0_N | |MIPI_L0_N | ||
| − | |||
| − | |||
|- | |- | ||
|3 | |3 | ||
| + | |MIPI_L0_P | ||
| + | |4 | ||
|GND | |GND | ||
| − | |||
| − | |||
|- | |- | ||
|5 | |5 | ||
| + | |MIPI_L1_N | ||
| + | |6 | ||
|MIPI_L1_P | |MIPI_L1_P | ||
| − | |||
| − | |||
|- | |- | ||
|7 | |7 | ||
| + | |GND | ||
| + | |8 | ||
|MIPI_CK_N | |MIPI_CK_N | ||
| − | |||
| − | |||
|- | |- | ||
|9 | |9 | ||
| + | |MIPI_CK_P | ||
| + | |10 | ||
|GND | |GND | ||
| − | |||
| − | |||
|- | |- | ||
|11 | |11 | ||
| + | |ENABLE | ||
| + | |12 | ||
|RST_TEST | |RST_TEST | ||
| − | |||
| − | |||
|- | |- | ||
|13 | |13 | ||
| + | |Triggerln_SCL | ||
| + | |14 | ||
|TriggerOut_SDA | |TriggerOut_SDA | ||
| − | |||
| − | |||
|- | |- | ||
|15 | |15 | ||
| − | | | + | |CN |
| | | | ||
| | | | ||
Revision as of 11:07, 25 July 2019
增强版转接板说明
1 概述
VEYE-MIPI-290/327摄像头模组可以同经典树莓派和树莓派Computer Module以及树莓派Zero实现对接。
- 经典树莓派同转接板连接方法：
通过1.0mm间距FFC异面线连接J2接口以及树莓派上的CAM接口
- 树莓派Computer Module及树莓派Zero同转接板连接方法：
通过0.5mm间距FFC异面线连接J9接口以及树莓派Computer Module及树莓派Zero上的CAM接口。
2 增强版转接板接口布局
- 用户接口，板间连接器J9引脚列表
| 1 | GND | 2 | MIPI_L0_N |
| 3 | MIPI_L0_P | 4 | GND |
| 5 | MIPI_L1_N | 6 | MIPI_L1_P |
| 7 | GND | 8 | MIPI_CK_N |
| 9 | MIPI_CK_P | 10 | GND |
| 11 | CN | 12 | CN |
| 13 | GND | 14 | CN |
| 15 | CN | 16 | GND |
| 17 | ENABLE | 18 | RST_TEST |
| 19 | GND | 20 | Triggerln_SCL |
| 21 | TriggerOut_SDA | 22 | CN |
- 用户接口，板间连接器J2引脚列表
| 1 | GND | 2 | MIPI_L0_N |
| 3 | MIPI_L0_P | 4 | GND |
| 5 | MIPI_L1_N | 6 | MIPI_L1_P |
| 7 | GND | 8 | MIPI_CK_N |
| 9 | MIPI_CK_P | 10 | GND |
| 11 | ENABLE | 12 | RST_TEST |
| 13 | Triggerln_SCL | 14 | TriggerOut_SDA |
| 15 | CN |
- 用户接口，板间连接器J4引脚列表
| 1 | +5V |
| 2 | GND |
- 用户接口，板间连接器J1引脚列表
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | MIPI_L3_P | 6 | RESERVE, Not Connected |
| 7 | MIPI_L3_N | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | MIPI_L2_P | 12 | RESERVE, Not Connected |
| 13 | MIPI_L2_N | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |