VEYE-MIPI-290/327
Jump to navigation
Jump to search
1 Introduction
Veye-mipi-290/327 is a camera module designed by Tianjin Zhongan Yijia technology co., LTD., with excellent low illumination and wide dynamic performance.This module only has 38*38*8mm, which is convenient for integration and can be connected to various embedded motherboards with adapter board.Suitable for machine vision, intelligent analysis, industrial control, face recognition, ADAS etc...
The imaging effect is shown here：
veye-mipi-327 vs. veye-mipi-290 indoor light environment effect
Raspberry pie platform veye-mipi-290 vs. The default camera ov5647 effect
2 Features
- 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY
- MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support)
- Uncompressed UYVY format, YUV422-8bit
- Standard lens mount
- IR-CUT circuit
- BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1
3 Thechnical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX290LQR-C/IMX327LQR-C STARVIS |
| Pixels | 2.07M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| ISP | |
| Frame Rate | 1080p@25 / 1080p@30fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Support |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, DOL-WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
| Lens Mount with IR-CUT | MTV12 or MTV16 |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| PCB Connector | BTB connector:BTB050040-F1D |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 12VDC compatibility |
| General | |
| Operating Conditions | -10℃-50℃, Humidity 95% or less, non-condensing |
| Power Supply | 3.3VDC |
| Power Consumption | 3.3VDC,1.2W |
| Dimension | 38mm*38mm*8mm(not include lens and lens mount) |
File:VEYE-290327-用户接口实物图.png
connector position
File:VEYE-290-327用户接口丝印图.png
silk bottom&J5 pin number
File:VEYE-MIPI-尺寸图-后视.png
dimension(Back view)
4 Diagram, Layout and Dimension
- J5 pin list
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | MIPI_L3_P | 6 | RESERVE, Not Connected |
| 7 | MIPI_L3_N | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | MIPI_L2_P | 12 | RESERVE, Not Connected |
| 13 | MIPI_L2_N | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |
- J3 pin list
| 1 | Day&Night Signal In |
| 2 | GND |
| 3 | NC |
- J4 pin list
| 1 | IRCUT1 |
| 2 | IRCUT2 |