CS-MIPI-SC132 Data Sheet

查看中文

CS-MIPI-SC132 Data Sheet

1 Introduction

CS-MIPI-SC132 is a cost-effective CSI-2 (MIPI) interface camera module that uses the SC132GS global shutter MONO CMOS sensor whice is SmartSens Technology‘s SmartGS™ series. CS-MIPI-SC132 supports trigger mode and video stream mode.

CS-MIPI-SC132 TOP

CS-MIPI-SC132 BOTTOM

2 Features

• 1/4 inch 1.3m pixel SmartGS™ CMOS sensor
• Only black and white mode is supported
• Global shutter
• Built-in ISP image processing
• CSI-2 data interface
• Uncompressed UYVY data format, YUV422-8bit data type
• Standard lens interface
• Brightness and contrast can be adjusted
• Support video stream mode
• Support trigger mode
• Support for dynamic firmware upgrade via USB flash drive
• Support Raspberry PI Platform,RK3399, NVIDIA JETSON Platform

3 Technical Detail

Technical Details
SENSOR
Sensor	SmartGS™ SC132GS
Pixels	1.3M pixels
Resolution	1080H*1280V
Image Size	1/4"
Unit Cell Size	2.7um (H)*2.7um(V)
Shutter Type	Global shutter
ISP
Frame Rate	1280*1080@45fps，1280*720@60fps， 640*480@120fps 1080*1280@45fps， 720*1280@60fps， 480*640@120fps
Exposure	自动/手动
Shutter	( 0 - 1 / Frame Rate ) second
Image Setting	Brightness, Contrast, Gamma, Flip, Mirror
Image Synchronization mode
Free-Run
Soft Trigger
Auto Trigger
Hardware Trigger
Lens
Lens	MTV12 / MTV16 / CS
Lens Mount	M12*P0.5 / M16*P0.5 / CS
Mounting Hole	2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector	15PIN FPC, Compatible with Raspberry PI，JETSON NANO
Communication Interface	IIC, 3.3VDC
Video Data Interface	CSI-2 : 2 Data Lanes MIPI CSI-2 DC Specifications
General
Operating Conditions (Bare PCB)	Performance guarantee temperature：-20℃~60℃, Humidity 95% or less, non-condensing Operating guarantee temperature： -30℃~85℃, Humidity 95% or less, non-condensing
Power Supply	5VDC / 3.3VDC optional
Power Consumption	TBD
Dimension	38mm*38mm*10mm(not include lens and lens mount)