MV-MIPI-IMX178M Data Sheet
Jump to navigation
Jump to search
MV-MIPI-IMX178M Data Sheet
1 Introduction
MV-MIPI-IMX178M is a 6 million MONO industrial camera with MIPI interface. This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.
2 Features
- 1/1.8 6M Pixel SONY CMOS SENSOR
- MIPI CSI-2 Interface
- Mono-8、Mono-10，Mono-12 Data Format
- Video streaming mode（Free Running），Hardware Trigger，Software Trigger，High-speed continuous trigger mode
- Single trigger multi-frame acquisition
- Strobe synchronization
- ROI mode
- USER Output
3 Technical Detail
| Technical Details | |
| Sensor Technology | CMOS |
| Shutter Type | Rolling Shutter |
| Sensor | SONY IMX178LLJ-C |
| Color | MONO |
| Image Size | 1/1.8 |
| Unit Cell Size | 2.4μm × 2.4μm |
| Resolution | 3088 × 2064 |
| Max Frame Rate | 3088 × 2064@22.3 fps |
| Gain | 0-48dB（again+dgain），0-24dB（again），0.1dB step |
| Exposure Time | ≤ 1/（max frame rate） |
| Shutter Mode | AE，ME，AE Once |
| ISP | Bad Pixel Correction，8bit GAMMA，User Lookup Table |
| ADC Resolution | 12 bit |
| Pixel Format | Mono8，Mono10，Mono12，UYVY 8bit |
| ROI | Support |
| Mirror Image | Mirror and Flip |
| Working Mode | Hardware Trigger，Software Trigger，Video streaming mode（Free Running） |
| Trigger Mode | Trigger Filtering，Trigger Delay，Trigger Polarity Control |
| Strobe Mode | Strobe Output Control，Strobe Delay，Strobe Polarity Control |
| Electrical characteristics | |
| Data Interface | CSI-2 : 2 Data Lanes
Data Rate / lane：1.5Gbps |
| Communication Interface | I2C 3.3V |
| Digital IO | Non-isolation IO：1 Trigger in，2 Multi-function output，3.3V Level |
| 供电 | 5VDC |
| 额定功率 | 0.9W@ 5VDC |
| Structure | |
| Size | Length * width * height = 29*29*11mm |
| Lens Mount | C-MOUNT-001-29*29 |
| Operating Conditions | |
| Temperature | Operating temperature：-30℃~ 60℃ |
| Humidity | Humidity 95% or less |
4 传感器光谱响应特性
| 传感器型号 | 光谱灵敏度 |
| IMX178LLJ-C |
5 接口引脚功能说明
| J3: CSI-2接口 | ||
| 引脚号 | 名称 | 说明 |
| 1 | GND | |
| 2 | VCC | 5V |
| 3 | VCC | 5V |
| 4 | VCC | 5V |
| 5 | VCC | 5V |
| 6 | GND | |
| 7 | ENABLE | 电源使能 |
| 8 | GND | |
| 9 | MIPI_L0_N | 数据线0负端 |
| 10 | MIPI_L0_P | 数据线0正端 |
| 11 | GND | |
| 12 | MIPI_L1_N | 数据线1负端 |
| 13 | MIPI_L1_P | 数据线1正端 |
| 14 | GND | |
| 15 | MIPI_CK_N | 时钟线 负端 |
| 16 | MIPI_CK_P | 时钟线 正端 |
| 17 | GND | |
| 18 | MIPI_L2_N | 数据线2负端（预留） |
| 19 | MIPI_L2_P | 数据线2正端（预留） |
| 20 | GND | |
| 21 | MIPI_L3_N | 数据线3负端（预留） |
| 22 | MIPI_L3_P | 数据线3正端（预留） |
| 23 | GND | |
| 24 | SCL | I2C 时钟线, 3.3V电平 |
| 25 | SDA | I2C 数据线, 3.3V电平 |
| 26 | GPIO3 | 预留 |
| 27 | OUT_IO2 | 可配置输出2，3.3V电平 |
| 28 | OUT_IO1 | 可配置输出1，3.3V电平 |
| 29 | TriggerIN_IO | 触发输入，3.3V电平 |
| 30 | GND | |
6 PCBA尺寸图
下载dwg图纸
7 PCBA 3D STP文件
下载STP文件