MV-MIPI-IMX296M Data Sheet
Revision as of 16:23, 29 April 2024 by Xumm (talk | contribs) (→Spectral Sensitivity Characteristics)
MV-MIPI-IMX296M Data Sheet
1 Introduction
MV-MIPI-IMX296M is a 1.55M MONO industrial camera with MIPI interface.
This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.
2 Features
- 1/2.9'' 1.55M Pixel SONY IMX296LLR-C Pregius Global Shutter CMOS SENSOR
- MIPI CSI-2 Interface
- Mono-8、Mono-10 Data Format
- Video streaming mode（Free Running），Trigger mode
- Hardware and Software trigger source
- Support trigger frame number, interval, delay, trigger filter function
- Strobe synchronization
- ROI
- USER Output
- Flexible frame rate settings
3 Technical Detail
| Technical Details | |
| Sensor Type | CMOS |
| Shutter Mode | Global Shutter |
| Sensor | SONY IMX296LLR-C Pregius |
| Color | MONO |
| Image Size | 1/2.9'' |
| Unit Cell Size | 3.45μm × 3.45μm |
| Resolution | 1456（H） × 1088（V） |
| Max Frame Rate | 1456×1088 @ 60.3fps |
| Gain | 0 dB to 24 dB: Analog Gain (0.1 dB step)
24.1 dB to 48 dB: Analog Gain: 24 dB + Digital Gain: 0.1 dB to 24 dB (0.1 dB step) |
| Exposure Time | ≤ 1/（max frame rate） |
| Shutter Mode | AE，ME，AE Once |
| ISP | Bad Pixel Correction，8bit GAMMA，User Lookup Table |
| ADC Resolution | 10 bit |
| Pixel Format | Mono8，Mono10，UYVY 8bit |
| ROI | Support |
| Mirror Image | Mirror and Flip |
| Working Mode | Hardware Trigger，Software Trigger，Video streaming mode（Free Running） |
| Trigger Mode | Trigger Filtering，Trigger Delay，Trigger Polarity Control |
| Strobe Mode | Strobe Output Control，Strobe Delay，Strobe Polarity Control |
| Electrical characteristics | |
| Data Interface | CSI-2 : 2 Data Lanes
Data Rate / lane：1.485Gbps |
| Communication Interface | I2C 3.3V |
| Digital IO | Non-isolation IO：1 Trigger in，2 Multi-function output，3.3V Level |
| Power Supply | 5VDC |
| Power Consumption | 0.95W@ 5V DC |
| Structure | |
| Size | Length * width * height = 29*29*11mm |
| Lens Mount | C-MOUNT01 |
| Operating Conditions | |
| Temperature | Operating temperature：-30℃~ 60℃ |
| Humidity | Humidity 95% or less |
4 Spectral Sensitivity Characteristics
| Sensor | Spectral Sensitivity |
| IMX296LLR-C |
5 Interface & Pin list
| J3: CSI-2 Interface，Up Contact | ||
| Pin NO. | NAME | Remarks |
| 1 | GND | |
| 2 | VCC | 5V |
| 3 | VCC | 5V |
| 4 | VCC | 5V |
| 5 | VCC | 5V |
| 6 | GND | |
| 7 | ENABLE | Power Enable，3.3V，ACTIVE High |
| 8 | GND | |
| 9 | MIPI_L0_N | Lane 0 Negative |
| 10 | MIPI_L0_P | Lane 0 Positive |
| 11 | GND | |
| 12 | MIPI_L1_N | Lane 1 Negative |
| 13 | MIPI_L1_P | Lane 1 Positive |
| 14 | GND | |
| 15 | MIPI_CK_N | CLK Negative |
| 16 | MIPI_CK_P | CLK Positive |
| 17 | GND | |
| 18 | MIPI_L2_N | Reserved |
| 19 | MIPI_L2_P | Reserved |
| 20 | GND | |
| 21 | MIPI_L3_N | Reserved |
| 22 | MIPI_L3_P | Reserved |
| 23 | GND | |
| 24 | SCL | I2C SCL, 3.3V Level |
| 25 | SDA | I2C SDA, 3.3V Level |
| 26 | GPIO3 | Reserved |
| 27 | OUT_2 | Multi-function Port 2，3.3V level |
| 28 | OUT_1 | Multi-function Port 1，3.3V level |
| 29 | TriggerIN | Hardware Trigger in，3.3V level |
| 30 | GND | |
6 Board Dimension
7 PCBA 3D STP File