Adapter Board for Raspberry Pi/zh
Jump to navigation
Jump to search
增强版转接板说明
1 概述
增强版转接板可以连接经典树莓派和树莓派Computer Module以及树莓派Zero。
- 经典树莓派同转接板连接方法：
通过1.0mm间距FFC异面线连接J2接口以及树莓派上的CSI_2接口
- 树莓派Computer Module及树莓派Zero同转接板连接方法：
通过0.5mm间距FFC异面线连接J9接口以及树莓派Computer Module及树莓派Zero上的CSI_2接口。
2 增强版转接板接口布局
- 用户接口，板间连接器J2引脚列表
| 1 | GND |
| 2 | MIPI_L0_N |
| 3 | MIPI_L0_P |
| 4 | GND |
| 5 | MIPI_L1_N |
| 6 | MIPI_L1_P |
| 7 | GND |
| 8 | MIPI_CK_N |
| 9 | MIPI_CK_P |
| 10 | GND |
| 11 | RESERVE, Not Connected |
| 12 | RESERVE, Not Connected |
| 13 | SCL_3.3V |
| 14 | SDA_3.3V |
| 15 | RESERVE, Not Connected |
- 用户接口，板间连接器J9引脚列表
| 1 | GND |
| 2 | MIPI_L0_N |
| 3 | MIPI_L0_P |
| 4 | GND |
| 5 | MIPI_L1_N |
| 6 | MIPI_L1_P |
| 7 | GND |
| 8 | MIPI_CK_N |
| 9 | MIPI_CK_P |
| 10 | GND |
| 11 | RESERVE, Not Connected |
| 12 | RESERVE, Not Connected |
| 13 | GND |
| 14 | RESERVE, Not Connected |
| 15 | RESERVE, Not Connected |
| 16 | GND |
| 17 | RESERVE, Not Connected |
| 18 | RESERVE, Not Connected |
| 19 | GND |
| 20 | SCL_3.3V |
| 21 | SDA_3.3V |
| 22 | RESERVE, Not Connected |
- 用户接口，板间连接器J4引脚列表
| 1 | +5V |
| 2 | GND |
- 用户接口，板间连接器J1引脚列表
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | MIPI_L3_P | 6 | RESERVE, Not Connected |
| 7 | MIPI_L3_N | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | MIPI_L2_P | 12 | RESERVE, Not Connected |
| 13 | MIPI_L2_N | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |