MV Series MIPI Camera Register Map

1 Overview

1.1 Register Features

The register address length is 4 bytes and the data length is 2 bytes.

Register R/W attributes: RW, RO, WO. Only the RW type can be saved to the camera flash.

Register values have several types: uint（unsigned int）, bool, enum, ascii.

1.2 I2c communication protocol

The module supports parameter configuration via i2c protocol. The default i2c slave address of the camera is 0x3b which can be modified.
I2c data input order is MSB-first transfer.

We provide open source shell scripts under Linux to help read and write each register.

The script function column in the following table indicates the function name in the shell script corresponding to this register.

1.3 Update timing

The camera has two states, standby and running, after the start of image acquisition into the running state.

In the following table, Update timing is divided into "A" and "S".

A: Read and write at any time.

S: Read only at Running state.

2 Basic Parameters

Address	Name	Data Type	R/W	Update timing	script function
0x0000	Manufacturer Name	ascii	RO	-	manufacturer
0x0004	Model Name	enum	RO	-	model
0x0008	Sensor Name	enum	RO	-
0x000C	Serial Number	uint	RO	-
0x0010	Device Version	uint	RO	-	version
0x0014	Factory Param	bool	WO	A	factoryparam
0x0018	Param save to flash	bool	WO	A	paramsave
0x001C	System reboot	bool	WO	A	reboot
0x0020	Time stamp	uint	RO	-	timestamp
0x0024	Error Code	uint	RO	-	errcode

3 Image Acquisition

Address	Name	Data Type	R/W	Update timing	script function
0x0400	Image Acquisition	bool	WO	A	imgacq
0x0404	Trigger Mode	enum	RW	S	trgmode
0x0408	Trigger Source	enum	RW	S	trgsrc
0x040C	Trigger Number	uint	RW	S	trgnum
0x0410	Trigger Interval	uint	RW	S	trginterval
0x0414	Trigger Software	bool	WO	A	trgone
0x0418	Trigger Count	uint	RW	A	trgcount
0x041C	I2C ADDR	uint	RW	A	i2caddr

4 Image Features

Address	Name	Data Type	R/W	Update timing	script function
0x0800	Test Image Selector	uint	RW	A	testimg
0x0804	Pixel Format	enum	RW	A	pixelformat
0x0808	Sensor Width	uint	RO	-	maxwh
0x080C	Sensor Height	uint	RO	-	maxwh
0x0810	MaxFrame Rate	uint	RO	-	maxfps
0x0814	Framerate	uint	RW	S	fps
0x0818	ROI Width	uint	RW	S	roi
0x081C	ROI Height	uint	RW	S	roi
0x0820	ROI Offset X	uint	RW	S	roi
0x0824	ROI Offset Y	uint	RW	S	roi
0x0828	Image Direction	enum	RW	A	imgdir
0x0830	Black Level	uint	RW	A	blacklevel

5 ISP

Address	Name	Data Type	R/W
0x0C00	ISP module ctrl	uint	RW
0x0C04	Exposure Mode	enum	RW
0x0C08	Target Brightness	uint	RW
0x0C0C	Exposure Time Source	enum	RW
0x0C10	ME Time	uint	RW
0x0C14	AE MAX Time	uint	RW
0x0C18	Exp Time	uint	RO
0x0C1C	Gain Mode	enum	RW
0x0C20	Manual Gain	uint	RW
0x0C24	AG Max Gain	uint	RW
0x0C28	Cur Gain	uint	RO
0x0C2C	AAROIOffsetX	uint	RW
0x0C30	AAROIOffsetY	uint	RW
0x0C34	AAROIWidth	uint	RW
0x0C38	AAROIHeight	uint	RW
0x0C3C	WB Mode	enum	RW
0x0C40	MWB Rgain	uint	RW
0x0C44	MWB Bgain	uint	RW
0x0C48	AWBROIOffsetX	uint	RW
0x0C4C	AWBROIOffsetY	uint	RW
0x0C50	AWBROIWidth	uint	RW
0x0C54	AWBROIHeight	uint	RW
0x0C58	AWB Rgain	uint	RO
0x0C5C	AWB Bgain	uint	RO
0x0C60	Gamma	uint	RW
0x0C64	DPC Start	bool	WO
0x0C68	DPC Status	enum	RO
0x0C6C	DPC Count	uint	RO
0x0C70	DPC Threshold	uint	RW
0x0C74	LUT Count	uint	RO
0x0C78	LUT Start	bool	WO
0x0C7C	LUT Done	bool	WO
0x0C80	AAROI enable	bool	WR

6 IO Control

Address	Name	Data Type	R/W	Update timing
0x1000	Trigger Delay	uint	RW	S
0x1004	Trigger Activation	uint	RW	S
0x1008	Trigger Filter Enable	uint	RW	S
0x100c	Trigger Filter Width	uint	RW	S
0x1010	Exposure Delay	uint	RW	S
0x1014	TriggerIN IO status	enum	RO	-
0x1020	GPIO1_OutSelect	uint	RW	A
0x1024	GPIO1 UserOut	enum	RW	A
0x1028	GPIO1 Reverse	bool	RW	A
0x102C	GPIO1 OutStatus	enum	RO	-
0x1030	GPIO2_OutSelect	uint	RW	A
0x1034	GPIO2 UserOut	enum	RW	A
0x1038	GPIO2 Reverse	bool	RW	A
0x103C	GPIO2 OutStatus	enum	RO	-