VEYE-MIPI-290/327
1 Introduction
Veye-mipi-290/327 is a camera module designed by Tianjin Zhongan Yijia technology co., LTD., with excellent low illumination and wide dynamic.This module only has 38*38*8mm, which is convenient for integration and can be connected to various embedded motherboards with adapter board.Suitable for machine vision, intelligent analysis, industrial control, face recognition, ADAS etc...
2 Features
- 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY
- MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support)
- Uncompressed UYVY format, YUV422-8bit
- Standard lens mount
- IR-CUT circuit
- BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1
3 Thechnical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX290LQR-C/IMX327LQR-C STARVIS |
| Pixels | 2.13M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| ISP | |
| Frame Rate | 1080p@25 / 1080p@30fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Support |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, DOL-WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
| Lens Mount with IR-CUT | MTV12 or MTV16 |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| PCB Connector | BTB connector:BTB050040-F1D |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | LVDS:3 Data Lanes, Bandwidth 1.5582Gbps or
MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 12VDC compatibility |
| General | |
| Operating Conditions | -10℃-50℃, Humidity 95% or less, non-condensing |
| Power Supply | 3.3VDC |
| Power Consumption | 3.3VDC,1.2W |
| Dimension | 38mm*38mm*8mm(not include lens and lens mount) |
File:VEYE-290327-用户接口实物图.png
connector position
File:VEYE-290-327用户接口丝印图.png
silk bottom&J5 pin number
File:VEYE-MIPI-尺寸图-后视.png
dimension(Back view)
4 Diagram, Layout and Dimension
- J5 pin list
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | MIPI_L3_P | 6 | RESERVE, Not Connected |
| 7 | MIPI_L3_N | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | MIPI_L2_P | 12 | RESERVE, Not Connected |
| 13 | MIPI_L2_N | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |
- J3 pin list
| 1 | Day&Night Signal In |
| 2 | GND |
| 3 | NC |
- J4 pin list
| 1 | IRCUT1 |
| 2 | IRCUT2 |