ADP-N1 Adapter Board Data Sheet
Jump to navigation
Jump to search
Adapter Board:ADP-N1 Data Sheet
1 Introduction
The function of ADP-U2 is to convert the interface of the VEYE-MIPI-327 camera module to the FPC28 interface of ADP-N1(a camera interposer module for AGX Xavier/TX2 DevKit).
2 Product Picture
| PART NUMBER / 型号 | FRONT VIEW / 正面图片 | BACK VIEW / 背面图片 | FFC CABLE/FFC线缆 | SKETCH MAP/示意图 |
| ADP-N1 |
3 Adapter Board Pinlist
| 1 | GND | |
| 2 | RESERVE | Not Connected |
| 3 | RESERVE | Not Connected |
| 4 | GND | |
| 5 | RESERVE | Not Connected |
| 6 | RESERVE | Not Connected |
| 7 | GND | |
| 8 | MIPI_CK_P | |
| 9 | MIPI_CK_N | |
| 10 | GND | |
| 11 | MIPI_L1_P | |
| 12 | MIPI_L1_N | |
| 13 | GND | |
| 14 | MIPI_L0_P | |
| 15 | MIPI_L0_N | |
| 16 | GND | |
| 17 | IO_EXT0 | Not Connected |
| 18 | IO_EXT1 | Not Connected |
| 19 | GND | |
| 20 | SCL | 3.3V LEVEL |
| 21 | SDA | 3.3V LEVEL |
| 22 | GND | |
| 23 | IO_EXT2 | Not Connected |
| 24 | IO_EXT3 | Not Connected |
| 25 | VCC3V3 | POWER |
| 26 | VCC3V3 | POWER |
| 27 | VCC3V3 | POWER |
| 28 | GND |
| 1 | VCC3V3 | POWER |
| 3 | VCC3V3 | POWER |
| 5 | GND | |
| 7 | GND | |
| 9 | MIPI_L0_N | |
| 11 | MIPI_L0_P | |
| 13 | GND | |
| 15 | MIPI_L1_N | |
| 17 | MIPI_L1_P | |
| 19 | GND | |
| 21 | MIPI_CK_N | |
| 23 | MIPI_CK_P | |
| 25 | GND | |
| 27 | RESERVE | Not Connected |
| 29 | RESERVE | Not Connected |
| 31 | GND | |
| 33 | RESERVE | Not Connected |
| 35 | RESERVE | Not Connected |
| 37 | GND | |
| 39 | RESERVE | Not Connected |
*Connected J5 of the VEYE-MIPI-327 camera module
4 Adapter Board Dimension
