Adapter Board for Raspberry Pi/zh
Jump to navigation
Jump to search
增强版转接板说明
1 概述
增强版转接板通过板到板连接器连接摄像头主板组成VEYE-MIPI-290/327摄像头模组,VEYE-MIPI-290/327摄像头模组可以同经典树莓派以及树莓派Computer Module实现对接。
- 可通过1.0mm间距FFC异面线连接J2接口以及树莓派上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同经典树莓派的对接。
- 也可通过0.5mm间距FFC异面线连接J9接口以及树莓派Computer Module上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同树莓派Computer Module的对接。
2 增强版转接板接口布局
- 用户接口,板间连接器J9引脚列表
1 | MIPI_L0_N | 2 | MIPI_L0_P |
3 | GND | 4 | MIPI_L1_N |
5 | MIPI_L1_P | 6 | GND |
7 | MIPI_CK_N | 8 | MIPI_CK_P |
9 | GND | 10 | CN |
11 | CN | 12 | GND |
13 | CN | 14 | CN |
15 | GND | 16 | ENABLE |
17 | RST_TEST | 18 | GND |
19 | Triggerln_SCL | 20 | TriggerOut_SDA |
21 | CN | 22 | GND |
- 用户接口,板间连接器J2引脚列表
1 | MIPI_L0_N | 2 | MIPI_L0_P |
3 | GND | 4 | MIPI_L1_N |
5 | MIPI_L1_P | 6 | GND |
7 | MIPI_CK_N | 8 | MIPI_CK_P |
9 | GND | 10 | ENABLE |
11 | RST_TEST | 12 | Triggerln_SCL |
13 | TriggerOut_SDA | 14 | CN |
15 | GND |
- 用户接口,板间连接器J4引脚列表
1 | +5V |
2 | GND |
- 用户接口,板间连接器J1引脚列表
1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
3 | GND | 4 | RESERVE, Not Connected |
5 | MIPI_L3_P | 6 | RESERVE, Not Connected |
7 | MIPI_L3_N | 8 | RESERVE, Not Connected |
9 | GND | 10 | GND |
11 | MIPI_L2_P | 12 | RESERVE, Not Connected |
13 | MIPI_L2_N | 14 | RESERVE, Not Connected |
15 | GND | 16 | GND |
17 | MIPI_CK_P | 18 | SCL_3.3V |
19 | MIPI_CK_N | 20 | SDA_3.3V |
21 | GND | 22 | RESERVE, Not Connected |
23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
27 | GND | 28 | RESERVE, Not Connected |
29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
33 | GND | 34 | GND |
35 | GND | 36 | GND |
37 | VCC3V3 | 38 | VCC3V3 |
39 | VCC3V3 | 40 | VCC3V3 |