MV Series MIPI Camera Register Map

查看中文

1 Overview

1.1 Register Features

The register address length is 4 bytes and the data length is 2 bytes.

Register R/W attributes: RW, RO, WO. Only the RW type can be saved to the camera flash.

Register values have several types: int, bool, enum, ascii.

1.2 I2c communication protocol

The module supports parameter configuration via i2c protocol. The default i2c slave address of the camera is 0x3b which can be modified.
I2c data input order is MSB-first transfer.

We provide open source shell scripts under Linux to help read and write each register.

1.3 Update timing

The camera has two states, standby and running, after the start of image acquisition into the running state.

In the following table, Update timing is divided into "A" and "S".

A: Read and write at any time.

S: Running state is readable only.