Mv mipi i2c.sh user guide

mv_mipi_i2c.sh Shell scripts usage

The mv_mipi_i2c.sh script is a tool set for configuring MV MIPI series cameras through the I2C.

Running

./enable_i2c_vc.sh

./camera_i2c_config

first，it will config IO pin. Then you can run mv_mipi_i2c.sh.

./mv_mipi_i2c.sh

Usage: ./mv_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -b bus

options:

-r read

-w write

-f [function name] function name

-p1 [param1] param1 of each function

-p2 [param1] param2 of each function

-p3 [param3] param3 of each function

-p4 [param4] param4 of each function

-b [i2c bus num] i2c bus number

-d [i2c addr] i2c addr if not default 0x3b

Please open this srcipt and read the COMMENT on top for support functions and samples

Please refer to the following article to determine which -b parameter you need to use.

Contents