GX-MIPI-IMX662 Data Sheet

查看中文

GX-MIPI-IMX662 Datasheet

1 Introduction

The GX-MIPI-IMX662 camera module is a new generation product from VEYE IMAGING, featuring Sony’s STARVIS 2 sensor technology.

Equipped with a high-performance built-in ISP, this module offers highly controllable image parameters, multiple operating modes, and a rich set of features, supporting video output up to 1080p@60 fps.

Its MIPI-CSI2 interface enables rapid integration into embedded (AI) systems, eliminating the need for complex ISP tuning.

Designed as a compact single-board module (38 mm × 38 mm), it uses a 22-pin FPC connector with 0.5 mm pitch, allowing easy connection to popular embedded (AI) platforms such as Raspberry Pi, NVIDIA Jetson series, and Rockchip RK3588.

GX-MIPI-IMX662

2 Features

• MIPI-CSI2 interface
• 1/2.8-inch, 2-megapixel Sony STARVIS 2 CMOS sensor
• Uncompressed data formats: UYVY / YUYV
• Maximum resolution and frame rate: 1920 × 1080 @ 60 fps
• Operating modes: video streaming mode, trigger mode, multi-camera synchronization mode
• Excellent built-in ISP image processing capabilities
• Continuously adjustable frame rate
• Integrated ICR (IR Cut ) control interface
• Day/night switching (color-to-monochrome conversion) synchronization interface
• Advanced image enhancement features: sharpening, 2D/3D noise reduction, anti-flicker, lens distortion correction, defogging, gamma adjustment, and Dynamic Range Compression (DRC)
• Low-light long-exposure capability
• Adjustable brightness, contrast, sharpness, and saturation
• Power supply: 5 V DC
• I2C compatible with both 1.8 V and 3.3 V

GX-MIPI-IMX662

3 Thechnical Detail

Thechnical Detail
Sensor
Sensor	SONY IMX662-AAQR-C STARVIS2
Pixels	2.07M pixel
Resolution	1920*1080
Image Size	Diagonal 6.45 mm (Type 1/2.8)
Unit Cell Size	2.9um (H)*2.9um(V)
Shutter Type	Rolling Shutter
SNR1s Value	0.18
ISP
Frame Rate	1920*1080@60fps(max)
Exposure	Auto or Manual
White Balance	Auto or Manual
Shutter	1/fps to 1/50,000s
Framerate	0.065 - 60 fps
Slow Shutter	Auto Slow Shutter control
ISP	sharpening, 2D/3D noise reduction, anti-flicker, lens distortion correction, defogging, gamma adjustment, and Dynamic Range Compression (DRC)
Image Setting	Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Day/Night Switch	Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens	MTV12 / MTV16 / CS
Lens Mount	M12*P0.5 / M16*P0.5 / CS，IRCUT is optional
Mounting Hole	2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
用户接口
物理接口	22脚 0.5mm间距FPC座，上接触
I2C接口	1.8V/3.3VDC电平兼容
视频数据接口	MIPI CSI-2标准，2 Data Lane + 1 Clk Lane，数据带宽1.188Gbps/lane 数据格式UYVY / YUYV，数据类型 YUV422-8bit （MIPI CSI-2 DC特性请参考这里）
IR-CUT控制接口	2pin 3.3VDC电机驱动接口
日夜转换触发同步接口	3.3VDC到12VDC控制电平输入兼容
一般规范
工作温度/湿度 （无外壳情况）	保证性能温度范围：-10℃～60℃,湿度95%无凝结 可工作温度范围：-30℃～85℃,湿度95%无凝结
电源	5V DC
功率	平时1.05W，IRCUT切换瞬间1.5W
尺寸	38mm*38mm（不含镜头及固定座高度），最高处高度小于8.2mm

4 传感器光谱响应特性

传感器型号	光谱灵敏度
IMX662-AAQR-C	IMX662-AAQR-C Spectral Sensitivity

5 接口引脚功能说明

GX-MIPI-IMX662

GX-MIPI-IMX662

J3:CSI-2接口
引脚号	名称	说明
1	NC
2	SDA	1.8V / 3.3V Level
3	SCL	1.8V / 3.3V Level
4	GND
5	NC
6	SYS_RSTn	系统复位，低有效
7	GND
8	NC
9	NC
10	GND
11	NC
12	NC
13	GND
14	MIPI_CK_P
15	MIPI_CK_N
16	GND
17	MIPI_L1_P
18	MIPI_L1_N
19	GND
20	MIPI_L0_P
21	MIPI_L0_N
22	GND

J2 : Day/Night 日夜切换外部同步信号
引脚号	名称	说明
1	Day&Night Signal In	输入信号，低电平有效（图像转黑白），兼容3.3V-12V电平
2	GND
3	NC

J4 : IRCUT 功能
模式	引脚号	引脚名	极性	图像模式	滤光片位置
模式1	1	IRCUT1	-	彩色	红外截止
	2	IRCUT2	+
模式2	1	IRCUT1	+	黑白	全波长通过
	2	IRCUT2	-

J6：5VDC INPUT
引脚号	引脚名	说明
1	5VDC	电源输入
2	GND	电源地

J7：触发或同步引脚
引脚号	引脚名	说明
1	TRIGGER / VSYNC	普通触发模式：触发信号输入； 同步模式主模式：同步信号输出； 同步模式从模式：同步信号输入；
2	GND
3	OUT1	输出信号，可定义为strobe信号或者TriggerWait信号

6 PCBA尺寸图

CAD结构图纸 单位：毫米

下载2D dxf图纸

7 PCBA 3D STP文件

下载3D STP文件