CS-MIPI-IMX307 STARVIS Module/zh
Jump to navigation
Jump to search
1 介绍
CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspberry PI.
It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras.
2 资源特性
- SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
- Built-in ISP processing
- CSI-2 Interface
- Uncompressed UYVY format, YUV422-8bit
- Standard lens mount
- IR-CUT circuit
- BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2
3 技术规格
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX307LQD-C STARVIS |
| Pixels | 2.07M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| SNR1s Value | 0.24lx |
| ISP | |
| Frame Rate | 1080p@25fps / 30fps, 720p@60fps / 50fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Coming Soon |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, Digtal WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
| Lens Mount with IR-CUT | MTV12 or MTV16 |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| Connector | 15PIN FPC, Compatible with Raspberry PI |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | CSI-2 : 2 Data Lanes, CSI-2 YUV422-8bit Data Type, Datarate=594Mbps/lane |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 5VDC compatibility |
| General | |
| Operating Conditions | -10℃~50℃, Humidity 95% or less, non-condensing |
| Power Supply | 5VDC |
| Power Consumption | 5VDC,1.4W |
| Dimension | 38mm*38mm*10mm(not include lens and lens mount) |
4 接口和引脚说明
4.1 J1:Firmware Update
| 1 | VBUS(5V) |
| 2 | D- |
| 3 | D+ |
| 4 | GND |
4.2 J3:Power Input
| 1 | 5VDC IN |
| 2 | GND |
4.3 J4:Day/Night External Trigger
| 1 | IR LED ON,Low level active |
| 2 | GND |
| 3 | RESERVE |
4.4 J6:IRCUT Control
| 1 | IRCUT1 |
| 2 | IRCUT2 |
4.5 J7:Trigger IN,Strobe OUT
| 1 | Trigger IN |
| 2 | GND |
| 3 | Strobe OUT |
4.6 J8:CSI-2 Interface
| 1 | GND |
| 2 | MIPI_L0_N |
| 3 | MIPI_L0_P |
| 4 | GND |
| 5 | MIPI_L1_N |
| 6 | MIPI_L1_P |
| 7 | GND |
| 8 | MIPI_CK_N |
| 9 | MIPI_CK_P |
| 10 | GND |
| 11 | NC |
| 12 | NC |
| 13 | SCL |
| 14 | SDA |
| 15 | NC |
5 板子尺寸
All data is in millimeters
File:CS-MIPI-IMX307 TOP CAD.pdf
CS-MIPI-IMX307 TOP CAD
6 镜头选型
下表所列镜头都可以配套该摄像头模组使用
| PART NUMBER
型号 |
F NO.
光圈 |
Focal-Length
焦距 |
Optical format
光学规格 |
Lens structure
镜片构成 |
Mount
接口 |
FOV(D/H/V) @1/2.7
视场角@1/2.7 |
IR filter
滤光片 |
IR CUT
滤光片切换器 |
Optical distortion
光学畸变 |
| YT0.95-4I | 0.95 | 4mm | 1/2.7 | 5G4P | M16*P0.5 | 109.9/92.3/48.7 | YES 有 | YES 有 | -40.8% |
| YT1.0-4I | 1.0 | 4mm | 1/2.7 | 2G5P | M12*P0.5 | 103.7/87/46.2 | YES 有 | YES 有 | -36.8% |
| YT1.0-4 | 1.0 | 4mm | 1/2.7 | 2G5P | M12*P0.5 | 103.7/87/46.2 | YES 有 | NO 无 | -36.8% |
| YT1.0-6I | 1.0 | 6mm | 1/2.7 | 3G3P | M12*P0.5 | 66.5/57.2/31.4 | YES 有 | YES 有 | -16.4% |
| YT2.0-3.5I | 2.0 | 3.5mm | 1/2.7 | 2G4P | M12*P0.5 | 92/82/51 | YES 有 | YES 有 | <1% |
| YT2.4-4I | 2.4 | 4mm | 1/2.7 | 1G3P | M12*P0.5 | 114.09/92.17/48.32 | YES 有 | YES 有 | -45% |