Difference between revisions of "CS-MIPI-SC132 Data Sheet"

From wiki_veye
Jump to navigation Jump to search
Line 42: Line 42:
 
|Unit Cell Size
 
|Unit Cell Size
 
|2.7um (H)*2.7um(V)
 
|2.7um (H)*2.7um(V)
|-
 
|Shutter Type
 
|Global shutter
 
 
|-
 
|-
 
| colspan="2" |'''ISP'''
 
| colspan="2" |'''ISP'''
Line 54: Line 51:
 
|Exposure
 
|Exposure
 
|Auto or Manual
 
|Auto or Manual
 +
|-
 +
|Shutter Type
 +
|Global shutter
 
|-
 
|-
 
|Gain
 
|Gain

Revision as of 22:17, 10 June 2020

查看中文

CS-MIPI-SC132 Data Sheet

1 Introduction

CS-MIPI-SC132 is a cost-effective CSI-2 (MIPI) interface camera module that uses the SC132GS global shutter MONO CMOS sensor whice is SmartSens Technology‘s SmartGS™ series. CS-MIPI-SC132 supports trigger mode and video stream mode.

CS-MIPI-SC132 TOP
CS-MIPI-SC132 BOTTOM

2 Features

  • 1/4 inch 1.3m pixel SmartGS™ CMOS sensor
  • Only black and white mode is supported
  • Global shutter
  • Built-in ISP image processing
  • CSI-2 data interface
  • Uncompressed UYVY data format, YUV422-8bit data type
  • Standard lens interface
  • Brightness and contrast can be adjusted
  • Support video stream mode
  • Support trigger mode
  • Support for dynamic firmware upgrade via USB flash drive
  • Support Raspberry PI Platform,RK3399, NVIDIA JETSON Platform

3 Technical Detail

Technical Details
SENSOR
Sensor SmartGS™ SC132GS
Pixels 1.3M pixels
Resolution 1080H*1280V
Image Size 1/4"
Unit Cell Size 2.7um (H)*2.7um(V)
ISP
Frame Rate 1280*1080@45fps,1280*720@60fps, 640*480@120fps

1080*1280@45fps, 720*1280@60fps, 480*640@120fps

Exposure Auto or Manual
Shutter Type Global shutter
Gain Auto or Manual
Shutter ( 0 - 1 / Frame Rate ) second
Image Setting Brightness, Contrast, Gamma, Flip, Mirror
Image Synchronization mode
Free-Run
Soft Trigger
Auto Trigger
Hardware Trigger
Lens
Lens MTV12 / MTV16 / CS
Lens Mount M12*P0.5 / M16*P0.5 / CS
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector 15PIN FPC, Compatible with Raspberry PI,JETSON NANO
Communication Interface IIC, 3.3VDC
Video Data Interface CSI-2 : 2 Data Lanes

MIPI CSI-2 DC Specifications

General
Operating Conditions

(Bare PCB)

Performance guarantee temperature:-20℃~60℃, Humidity 95% or less, non-condensing

Operating guarantee temperature: -30℃~85℃, Humidity 95% or less, non-condensing

Power Supply 5VDC / 3.3VDC optional
Power Consumption TBD
Dimension 38mm*38mm*10mm(not include lens and lens mount)

4 Optical Quantum Efficiency

Sensor Quantum Efficiency
SC132GS
SC132GS QE

5 Interface & Pin list

CS-MIPI-SC132-TOP LAYER
File:CS-MIPI-SC132 006.jpg
CS-MIPI-SC132-BOTTOM INTERFACE
J1 : Firmware Update
Pin NO. NAME Remarks
1 VBUS(5V) Connect the USB upgrade cable & USB disk
2 D-
3 D+
4 GND
J3 : Power Input
Pin NO. NAME Remarks
1 VCC5V use by default. How to use 3.3V power supply
2 GND
J7 : Multi-function GPIO
Pin NO. NAME Remarks
1 GPIO0 Multi-function IO
2 GND
3 GPIO1 Multi-function IO
J8 : CSI-2 Interface
Pin NO. NAME Remarks
1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 NC
12 NC
13 SCL 3.3V Level
14 SDA 3.3V Level
15 VCC3V3 NC by default,How to use 3.3V power supply

6 Board Dimension