Technical Details
|
SENSOR
|
Sensor
|
SmartSens SmartGS™ SC132GS
|
Pixels
|
1.3M pixels
|
Resolution
|
1080H*1280V
|
Image Size
|
1/4"
|
Unit Cell Size
|
2.7um *2.7um
|
Output Format
|
RAW MONO
|
Shutter Type
|
Global shutter
|
ISP
|
Frame Rate
|
1280*1080@45fps,1280*720@60fps, 640*480@120fps
1080*1280@45fps, 720*1280@60fps, 480*640@120fps
|
Exposure
|
Auto or Manual
|
Gain
|
Auto or Manual
|
Shutter
|
( 0 - 1 / Frame Rate ) second
|
Image Setting
|
Brightness, Contrast, Gamma, Flip, Mirror
|
Image Synchronization mode
|
Free-Run
|
The sensor runs under an autonomous clock system
|
Soft Trigger
|
The image is triggered by the software control register
|
Auto Trigger
|
The image is automatically triggered periodically by configuring the control register
|
Hardware Trigger
|
The image is triggered by an external trigger signal
|
Lens
|
Lens
|
MTV12 / MTV16 / CS
|
Lens Mount
|
M12*P0.5 / M16*P0.5 / CS
|
Mounting Hole
|
2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
|
Interface
|
Connector
|
15PIN FPC, Compatible with Raspberry PI,JETSON NANO
|
Communication Interface
|
IIC, 3.3VDC
|
Video Data Interface
|
CSI-2 : 2 Data Lane,MIPI CSI-2 DC Specifications
|
MIPI CLK frequence
|
297MHz
|
MIPI Data bandwidth
|
594Mbps / lane * 2
|
Data Type
|
YUV422-8bit
|
General
|
Operating Conditions
(Bare PCB)
|
Performance guarantee temperature:-20℃~60℃, Humidity 95% or less, non-condensing
Operating guarantee temperature: -30℃~85℃, Humidity 95% or less, non-condensing
|
Power Supply
|
5VDC / 3.3VDC optional
|
Power Consumption
|
TBD
|
Dimension
|
38mm*38mm*10mm(not include lens and lens mount)
|