Line 1: |
Line 1: |
| [[V-by-One-HS KIT appnotes 4 rpi/zh|查看中文]] | | [[V-by-One-HS KIT appnotes 4 rpi/zh|查看中文]] |
| + | |
| + | === Overview === |
| + | V-by-One® HS is a high-performance SerDes solution provided by THine, offering excellent performance and cost-effectiveness. |
| + | |
| + | We have developed the V-by-One-HS KIT product based on the V-by-One® HS solution, specifically designed for long-range transmission of images from MV series and RAW series camera products. |
| + | |
| + | The V-by-One-HS KIT features great adaptability, a wide range of input-output interfaces, and comprehensive driver support. |
| + | |
| + | ==== Camera module list ==== |
| + | {| class="wikitable" |
| + | !Series |
| + | !Model |
| + | !Status |
| + | |- |
| + | |MV series |
| + | |MV-MIPI-IMX178M |
| + | |Done |
| + | |- |
| + | |MV series |
| + | |MV-MIPI-SC130M |
| + | |Done |
| + | |- |
| + | |MV series |
| + | |MV-MIPI-IMX296M |
| + | |Done |
| + | |- |
| + | |MV series |
| + | |MV-MIPI-IMX287M |
| + | |Done |
| + | |- |
| + | |MV series |
| + | |MV-MIPI-IMX265M |
| + | |Done |
| + | |- |
| + | |MV series |
| + | |MV-MIPI-IMX264M |
| + | |Done |
| + | |- |
| + | |RAW series |
| + | |RAW-MIPI-SC132M |
| + | |Done |
| + | |- |
| + | |RAW sereies |
| + | |RAW-MIPI-AR0234M |
| + | |ing |
| + | |- |
| + | |RAW sereies |
| + | |RAW-MIPI-IMX462M |
| + | |ing |
| + | |} |
| + | |
| + | ==== Essential preparations ==== |
| + | V-by-One provides a transparent channel for long-range transmission of images, I2C, and IO. |
| + | |
| + | For the functionality of the camera module itself, it is similar to connecting the camera module directly to the Raspberry Pi using the MIPI interface. |
| + | |
| + | Therefore, it is essential to refer to the instructions on [[Mv series camera appnotes 4 rpi|how to use the MV series camera module on the Raspberry Pi platform]]. |
| + | |
| + | ===Hardware Setup=== |
| + | ====Connection of V-by-One-HS-RX and Camera==== |
| + | |
| + | ===== MV series camera ===== |
| + | The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside. |
| + | {| class="wikitable" |
| + | !TOP |
| + | !BOTTOM |
| + | |- |
| + | |[[File:V-by-One-HS-RX connect with MV cam.jpg|alt=|center|thumb|600x600px|V-by-One-HS-RX to MV-MIPI-X|link=http://wiki.veye.cc/index.php/File:V-by-One-HS-RX_connect_with_MV_cam.jpg]] |
| + | |[[File:V-by-One-HS-RX to MV-MIPI-X.jpg|alt=|center|thumb|600x600px|V-by-One-HS-RX to MV-MIPI-X|link=http://wiki.veye.cc/index.php/File:V-by-One-HS-RX_to_MV-MIPI-X.jpg]] |
| + | |} |
| + | |
| + | ===== RAW series camera ===== |
| + | RAW series cameras have two output specifications: 15-pin interface and 22-pin interface. |
| + | |
| + | * For the 22-pin interface type: |
| + | |
| + | Use a 0.5mm pitch * 22-pin FFC with an opposite direction. Please ensure that the silver contact surfaces are facing outward. |
| + | |
| + | * For the 15-pin interface type (RAW-MIPI-SC132M): |
| + | |
| + | Use a 15-to-22 pin FFC with a same-side direction. Please ensure that the silver contact surfaces are facing outward. |
| + | |
| + | ==== Connection of V-by-One-HS-RX and V-by-One-HS-TX ==== |
| + | In most cases, only one coaxial cable is sufficient to meet the image transmission bandwidth requirements. One coaxial cable can provide an effective bandwidth of 3.2Gbps. |
| + | |
| + | Below are scenarios where two coaxial cables are required: |
| + | |
| + | * RAW-MIPI-AR0234M: Configured as 4 lanes and output format set to RAW10. |
| + | |
| + | ==== Connection of V-by-One-HS-RX and Raspberry Pi ==== |
| + | |
| + | ===== Power Supply ===== |
| + | The V-by-One-HS-RX requires a 12V DC power supply. You can choose either J1 or J2 for the power input. |
| + | |
| + | ===== Raspberry Pi Model B and Model B+ ===== |
| + | Use a 1mm pitch 15-pin FFC to connect V-by-One-HS-RX's J9 to the Raspberry Pi's MIPI CSI-2 interface. |
| + | |
| + | ===== Raspberry Pi Zero, Zero W, and Computer Module ===== |
| + | Use a 0.5mm pitch 22-pin FFC to connect V-by-One-HS-RX's J7 to the Raspberry Pi's MIPI CSI-2 interface. |
| + | <br />[[File:V-By-One-HS-Kit with MV camera.jpg|center|thumb|800x800px|V-By-One-HS-Kit with MV camera|link=http://wiki.veye.cc/index.php/File:V-By-One-HS-Kit_with_MV_camera.jpg]]<br /> |