3,108
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: − + Line 10:
Line 10: − +
no edit summary
硬件采用的树莓派4B,配合一个200万像素的摄像头，带白天黑夜模式切换功能，软件部分用Linux Shell脚本完成，每2分钟拍摄一张照片，最终用ffmpeg命令将所需的照片合成延时摄影视频。
硬件采用的树莓派4B,配合一个200万像素的摄像头，带白天黑夜模式切换功能，软件部分用Linux Shell脚本完成，每2分钟拍摄一张照片，最终用ffmpeg命令将所需的照片合成延时摄影视频。
视频链接地址移步[https://www.bilibili.com/video/BV1ZE411F7pB 这里]。（HardYun老刘的作品，''<u><big>未经作者授权，禁止转载，如需转载请联系作者本人</big></u>''）。
视频链接地址移步[https://www.bilibili.com/video/BV1ZE411F7pB 这里]。（HardYun老刘的作品<small>，''<u>未经作者授权，禁止转载，如需转载请联系作者本人</u>''</small>）。
To celebrate Raspberry PI's eighth birthday，[http://www.chaihuo.org/ @CHAIHUO MAKERS] (2020/3/14) held a Raspberry Jam online sharing event in shenzhen.[http://www.hardyun.com/ HardYun liu] was honored to share a Raspberry Pi time-lapse photography project at the event.The hardware used
To celebrate Raspberry PI's eighth birthday，[http://www.chaihuo.org/ @CHAIHUO MAKERS] (2020/3/14) held a Raspberry Jam online sharing event in shenzhen.[http://www.hardyun.com/ HardYun liu] was honored to share a Raspberry Pi time-lapse photography project at the event.The hardware used
raspberry PI 4B, with a 2-megapixel camera, with day and night mode switching function, the software part of the use of Linux Shell script to complete, every 2 minutes to take a photo, and finally use ffmpeg command to the required photos into time-delay video.
raspberry PI 4B, with a 2-megapixel camera, with day and night mode switching function, the software part of the use of Linux Shell script to complete, every 2 minutes to take a photo, and finally use ffmpeg command to the required photos into time-delay video.
[https://www.bilibili.com/video/BV1ZE411F7pB Video link here...]（HardYun Lao liu's works, ''<big><u>without the author's authorization, prohibited to reprint, if you need to reprint please contact the author</u></big>''）.
[https://www.bilibili.com/video/BV1ZE411F7pB Video link here...]（HardYun Lao liu's works, ''<u><small>without the author's authorization, prohibited to reprint, if you need to reprint please contact the author</small></u>''）.