1,602
edits
Changes
Jump to navigation
Jump to search
Line 54:
Line 54: − + + + Line 477:
Line 479: + + + + + + + + + + + + + + + + + + +
→boardmodel
-b [i2c bus num] i2c bus number
-b [i2c bus num] i2c bus number
support functions: devid,hdver,wdrmode,videoformat,mirrormode,denoise,agc,lowlight,daynightmode,ircutdir,irtrigger,mshutter
support functions: devid,hdver,wdrmode,videoformat,mirrormode,denoise,agc,lowlight,daynightmode,ircutdir,irtriggerhutter
cameramode, nodf, capture, csienable,saturation,wdrbtargetbr,wdrtargetbr, brightness ,contrast , sharppen, aespeed,lsc,boardmodel,yuvseq,i2cauxenable,i2cwen
Pi3B / Pi3B+ / 3A / 4B(1G/2G/4G)，we use i2c0
Pi3B / Pi3B+ / 3A / 4B(1G/2G/4G)，we use i2c0
===== boardmodel =====
===== boardmodel =====
<code>./veye_mipi_i2c.sh -r -f boardmodel</code>
<code>./veye_mipi_i2c.sh -r -f boardmodel</code>
Requirment: hdver >=4.
Read the board number of the board, which can be used to distinguish between VEYE-MIPI-327 and VEYE-MIPI-IMX327S.
Read the board number of the board, which can be used to distinguish between VEYE-MIPI-327 and VEYE-MIPI-IMX327S.
===== i2cwen =====
<code>./veye_mipi_i2c.sh -r -f i2cwen</code>
<code>./veye_mipi_i2c.sh -w -f i2cwen -p1 [0/1]</code>
Requirment: hdver >=4.
Whether to enable the i2C write register function of the camera, enabled by default. It is used for register write protection in special cases.
===== i2cauxenable =====
<code>./veye_mipi_i2c.sh -r -f i2cauxenable</code>
<code>./veye_mipi_i2c.sh -w -f i2cauxenable -p1 [0/1]</code>
Requirment: hdver >=4.
Whether to enable auxiliary i2C. If enable auxiliary i2C, the primary i2C on the FFC cable cannot be used. Used for bus conflict resolution in special cases.
<br />
<br />