1,602
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: − + − + +
RaspberryPI I2C confilct problem (view source)
Revision as of 20:23, 3 June 2021
, 20:23, 3 June 2021→Hardware solution (recommended)
In order to avoid conflicts, when you need to use our MIPI camera module and LCD screen in the product at the same time, it is recommended to use i2C on 40-pin GPIO header to control the camera.
In order to avoid conflicts, when you need to use our MIPI camera module and LCD screen in the product at the same time, it is recommended to use i2C on 40-pin GPIO header to control the camera.
*VEYE-MIPI-327、CS-MIPI-IMX307、CS-MIPI-SC132
*VEYE-MIPI-327 CS-MIPI-IMX307 CS-MIPI-SC132
It is recommended to make an adapter board to export the i2c pin of the camera to a separate connector and disconnect it from the Raspberry Pi FFC cable.
It is recommended to make an adapter board to export the i2c pin of the camera to a separate connector and disconnect it from the Raspberry Pi FFC cable.
*VEYE-MIPI-327S
*VEYE-MIPI-327S VEYE-MIPI-IMX462 VEYE-MIPI-IMX385
We have supported the independent I2C interface function, and there is no need to make a separate adapter board.
We have supported the independent I2C interface function, and there is no need to make a separate adapter board.
http://wiki.veye.cc/index.php/VEYE-MIPI-290/327_i2c/zh#i2cauxenable
==== Software solution (ways to avoid it) ====
==== Software solution (ways to avoid it) ====