Line 15: |
Line 15: |
| Jetson Nano的系统安装及使用请参考官方文档:[https://developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit get-started-jetson-nano-devkit]. 详细的开发资料请参考官方文档:https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-321/index.html | | Jetson Nano的系统安装及使用请参考官方文档:[https://developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit get-started-jetson-nano-devkit]. 详细的开发资料请参考官方文档:https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-321/index.html |
| | | |
− | ==== 开发环境准备 ==== | + | ====开发环境准备==== |
| | | |
− | * Host PC which runs Ubuntu 16.04 (64-bit). | + | *Host PC which runs Ubuntu 16.04 (64-bit). |
| | | |
− | * NVIDIA® provided L4T release and corresponding sample rootfs for Jetson Nano™ development kit. | + | *NVIDIA® provided L4T release and corresponding sample rootfs for Jetson Nano™ development kit. |
| | | |
− | * A kernel image , device tree blob (DTB) file and module drivers for the VEYE-MIPI-290/327 camera. The release package contains a kernel binary (Image),DTB files and module drivers, which you can download and rebuild from source. | + | *A kernel image , device tree blob (DTB) file and module drivers for the VEYE-MIPI-290/327 camera. The release package contains a kernel binary (Image),DTB files and module drivers, which you can download and rebuild from source. |
| | | |
− | * A jumper pin connected across J48 button header to enable DC power. | + | *A jumper pin connected across J48 button header to enable DC power. |
− | * A USB cable (micro USB port) to plug into the recovery port of the Jetson Nano™ | + | *A USB cable (micro USB port) to plug into the recovery port of the Jetson Nano™ |
− | * development kit. | + | *development kit. |
− | * Power cable (5V-4A) to power the Jetson Nano™ board. | + | *Power cable (5V-4A) to power the Jetson Nano™ board. |
− | * Micro SD card must be connected to the J501 slot. | + | *Micro SD card must be connected to the J501 slot. |
− | * A jumper pin must be connected to the pin 3 and pin 4 of J40 button header. | + | *A jumper pin must be connected to the pin 3 and pin 4 of J40 button header. |
| | | |
| ===系统更新=== | | ===系统更新=== |
| + | |
| + | ==== 准备工作 ==== |
| | | |
| ====使用编译好的程序==== | | ====使用编译好的程序==== |