Difference between revisions of "CS-LAMP-IR Data Sheet"

From wiki_veye
Jump to navigation Jump to search
(Created page with "产品概要 CS-IRLAMP BOARD用来检测环境光亮度，在亮度低至阈值时，开启红外灯，同时输出日夜（红外灯关闭/开启）状态，为红外滤光...")
 
(24 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
产品概要
+
[[CS-LAMP-IR Data Sheet/zh|查看中文]]<br />
−
CS-IRLAMP BOARD用来检测环境光亮度，在亮度低至阈值时，开启红外灯，同时输出日夜（红外灯关闭/开启）状态，为红外滤光片的切换提供依据。
+
<big><big><big>'''CS-LAMP-IR Data Sheet'''</big></big></big>
−
技术细节
+
=='''Introduction'''==
−
供电 DC 5V
+
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.
−
功耗 550mW
 
−
检测波长  390nm~700nm
 
−
红外灯波长  850nm
 
  
−
接口定义
+
The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.
−
J1、J4 、J5引脚并联，可视情况选用。
+
 
−
J1 引脚定义
+
When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.
−
1 DC 5V
+
 
−
2 GND
+
=='''Technical Detail'''==
−
J4 引脚定义
+
{| class="wikitable"
−
1 DC 5V
+
!Technical Detail
−
2 GND
+
!
−
J5 引脚定义
+
|-
−
1 DC 5V
+
|Power Supply
−
2 GND
+
|DC5V
−
J2 引脚定义
+
|-
−
1 NIGHT_O,  High Level active
+
|Power Consumption
−
2 GND
+
|550mW
−
3 NIGHT_O_n,  Complementary NIGHT_O,  Open-Collector
+
|-
 +
|Detection Wavelength
 +
|390nm~700nm
 +
|-
 +
|IR LED Wave Length
 +
|850nm
 +
|}
 +
[[File:CS-LAMP-IR-TOP Interface.jpg|thumb|CS-LAMP-IR-TOP Interface]]
 +
 
 +
=='''Interface & Pin list'''==
 +
'''''J1、J4 、J5 pins are connected in parallel''''', please choose them according to the situation.
 +
 
 +
'''J1'''
 +
{| class="wikitable"
 +
|1
 +
|DC 5V
 +
|-
 +
|2
 +
|GND
 +
|}
 +
[[File:CS-LAMP-IR-003 BOT Interface.jpg|thumb|CS-LAMP-IR-003 BOT Interface]]
 +
'''J2'''
 +
{| class="wikitable"
 +
|1
 +
|NIGHT_O
 +
|Active High
 +
|-
 +
|2
 +
|GND
 +
|
 +
|-
 +
|3
 +
|NIGHT_O_n  
 +
|Active Low,  Open-Collector
 +
|}'''J4'''
 +
{| class="wikitable"
 +
|1
 +
|DC 5V
 +
|-
 +
|2
 +
|GND
 +
|}
 +
'''J5'''
 +
{| class="wikitable"
 +
|1
 +
|DC 5V
 +
|-
 +
|2
 +
|GND
 +
|}
 +
==Board Dimension==
 +
<br />
 +
[[File:CS-LAMP-IR结构图纸.jpg|thumb|600x600px| CS-LAMP-IR CAD drawing / unit : mm|alt=|none]]
 +
[[Media:CS-LAMP-IR CAD.dwg|Download dwg file here]]

Revision as of 10:53, 13 February 2020

查看中文
CS-LAMP-IR Data Sheet

1 Introduction

The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.

The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.

When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.

2 Technical Detail

Technical Detail
Power Supply DC5V
Power Consumption 550mW
Detection Wavelength 390nm~700nm
IR LED Wave Length 850nm
CS-LAMP-IR-TOP Interface

3 Interface & Pin list

J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.

J1

1 DC 5V
2 GND
CS-LAMP-IR-003 BOT Interface

J2

1 NIGHT_O Active High
2 GND
3 NIGHT_O_n   Active Low,  Open-Collector

J4

1 DC 5V
2 GND

J5

1 DC 5V
2 GND

4 Board Dimension


CS-LAMP-IR CAD drawing / unit : mm

Download dwg file here

Retrieved from "http://wiki.veye.cc/index.php?title=CS-LAMP-IR_Data_Sheet&oldid=1575"