2,054
edits
Changes
Jump to navigation
Jump to search
Line 36:
Line 36: + + Line 57:
Line 59: − <code>sudo ./install_driver.sh [camera module]</code>+ − camera module：could be veye327,csimx307,cssc132,veyecam2m.+ + + + + + + + + Line 72:
Line 82: − + + + + + + + + + + + + − camera module：could be veye327,csimx307,cssc132,veyecam2m.+ Line 110:
Line 131: + + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 127:
Line 185: + + + + + + + Line 149:
Line 214: + + + + Line 216:
Line 285: − <nowiki>https://github.com/veyeimaging/raspberrypi/tree/master/i2c_cmd</nowiki>+ Line 282:
Line 351: + + + + + + + +
→Raspberry Pi 5 Setting
|Done
|Done
|}
|}
In addition, FPD-Link3 mode connection is now supported.
=== Hardware Setup ===
=== Hardware Setup ===
[[VEYE-MIPI-290/327 for Raspberry Pi#Hardware Setup|VEYE series camera module setup on rpi]]
[[VEYE-MIPI-290/327 for Raspberry Pi#Hardware Setup|VEYE series camera module setup on rpi]]
<code>chmod +x *</code>
<code>chmod +x *</code>
* For Raspberry Pi 5
<code>sudo ./install_driver_rpi5.sh camera_module_name</code>
It will install both CAM1 and CAM0 overlays in /boot/config.txt.
* For other Raspberry Pi
<code>sudo ./install_driver.sh camera_module_name</code>
camera_module_name：could be veye327,csimx307,cssc132,veyecam2m.
'''Note: veyecam2m is a new version driver that can replace veye327 and supports all modules of the VEYE series with 200W resolution.'''
'''Note: veyecam2m is a new version driver that can replace veye327 and supports all modules of the VEYE series with 200W resolution.'''
If you need to change to using the camera by veye_raspicam software, or if you want to change to a driver of another camera module model, you must first uninstall the current driver.
If you need to change to using the camera by veye_raspicam software, or if you want to change to a driver of another camera module model, you must first uninstall the current driver.
<code>sudo ./uninstall_driver.sh [camera module]</code>
<code>sudo ./uninstall_driver.sh camera_module_name</code>
camera_module_name：could be veye327,csimx307,cssc132,veyecam2m.
==== Camera in FPD-Link3 Mode ====
For a camera operating in FPD-Link3 transmission mode, it is necessary to ensure that the ds90ub954 driver is loaded and initialized before loading the camera driver and performing probe.
Take the VEYE-MIPI-IMX327S camera in FPD-Link3 mode as an example:
Install the drivers correctly:
<code>sudo ./install_driver.sh ds90ub954</code>
<code>sudo ./install_driver.sh veyecam2m</code>
=== Check and Test the Camera ===
=== Check and Test the Camera ===
==== List the available video modes ====
==== List the available video modes ====
<code>v4l2-ctl --list-formats-ext</code>
<code>v4l2-ctl --list-formats-ext</code>
===Raspberry Pi 5 Setting===
On Raspberry Pi 5,the drivers now use the media controller API, and we must setup the media graph correctly first. This includes setting up the media pad formats correctly and correctly linking them together.
=== Preview using VLC ===
We provide a series of scripts to implement this functionality, saved in the rpi5_scripts directory.
*./find_entity.sh
<code>$ ./find_entity.sh</code>
<code>Found veyecam2m @ i2c-6 entity on /dev/media0</code>
<code>Plese get frame from /dev/video0 and use /dev/v4l-subdev2 for camera setting.</code>
After a reboot of Raspberry Pi 5, the media node and video node of the camera may change. Therefore, it is recommended to execute <code>./find_entity.sh</code> before performing subsequent operations to identify the device nodes.
The above prompt shows that the system has detected two cameras and their corresponding device nodes.
<code>i2c-4</code> corresponds to the CAM1 port on the board, and <code>i2c-6</code> corresponds to the CAM0 port on the board.
*media_setting_rpi5.sh
<code>./media_setting_rpi5.sh</code>
<code>Usage: ./media_setting_rpi5.sh veyecam2m/csimx307/cssc132/mvcam -fmt [UYVY/RAW8/RAW10/RAW12] -w [width] -h [height]</code>
<code>This shell script is designed to detect the connection of a camera on Raspberry Pi 5.</code>
<code> It utilizes media-ctl and v4l2-ctl commands to configure the linking relationships and data formats of the media pad.</code>
<code> Once completed, you can directly use /dev/video0 or /dev/video8 to obtain image data</code>
'''Note: This script must be executed after each startup to complete the configuration of the parameters before proceeding with further operations.'''
For instance:
<code>./media_setting_rpi5.sh veyecam2m</code>
===Preview===
On a raspberry pi 5, VLC for preview is now having problems and not working.
==== Preview using VLC ====
1. Open VLC with command line <code>vlc</code> , or click the icon to launch.
1. Open VLC with command line <code>vlc</code> , or click the icon to launch.
[[File:Play camera using VLC on RPI.png|alt=Play camera using VLC on RPI|center|thumb|1000x1000px|Play camera using VLC on RPI]]
[[File:Play camera using VLC on RPI.png|alt=Play camera using VLC on RPI|center|thumb|1000x1000px|Play camera using VLC on RPI]]
<br />
<br />
======Preview using qv4l2======
Install qv4l2，
<code>sudo apt install qv4l2</code>
1. Open VLC with command line <code>vlc</code> to launch.
2. Hit the <code>▶</code>(Play) button to call the open media window.
=== Gstreamer usage samples ===
=== Gstreamer usage samples ===
<code>export DISPLAY=:0</code>
<code>export DISPLAY=:0</code>
==== Preview (VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode) ====
==== Preview (VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode) ====
<code>gst-launch-1.0 v4l2src io-mode=dmabuf device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! v4l2convert capture-io-mode=dmabuf output-io-mode=dmabuf ! autovideosink sync=false -v</code>
<code>gst-launch-1.0 v4l2src io-mode=dmabuf device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! v4l2convert capture-io-mode=dmabuf output-io-mode=dmabuf ! autovideosink sync=false -v</code>
Or：
<code>gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! autovideosink sync=false -v</code>
==== Preview and Scale with timestamp on (VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode) ====
==== Preview and Scale with timestamp on (VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode) ====
Because of the high flexibility of our camera parameters, we do not use V4L2 parameters to control, but use scripts to configure parameters.
Because of the high flexibility of our camera parameters, we do not use V4L2 parameters to control, but use scripts to configure parameters.
https://github.com/veyeimaging/raspberrypi_v4l2/tree/main/i2c_cmd
[[VEYE-MIPI-290/327 for Raspberry Pi#Video Control Toolkits Manual|VEYE Series Video Control Toolkits Manual]]
[[VEYE-MIPI-290/327 for Raspberry Pi#Video Control Toolkits Manual|VEYE Series Video Control Toolkits Manual]]
=== Document History ===
=== Document History ===
* 2024-01-01
Add support for Raspberrypi 5.
* 20230607
Add FPD-Link3 Driver and Its Description.
* 20230304
* 20230304