Line 61: |
Line 61: |
| * For Raspberry Pi 5 | | * For Raspberry Pi 5 |
| | | |
− | <code>sudo ./install_driver_rpi5.sh [camera module]</code> | + | <code>sudo ./install_driver_rpi5.sh camera_module_name</code> |
| | | |
| It will install both CAM1 and CAM0 overlays in /boot/config.txt. | | It will install both CAM1 and CAM0 overlays in /boot/config.txt. |
Line 67: |
Line 67: |
| * For other Raspberry Pi | | * For other Raspberry Pi |
| | | |
− | <code>sudo ./install_driver.sh [camera module]</code> | + | <code>sudo ./install_driver.sh camera_module_name</code> |
| | | |
− | camera module:could be veye327,csimx307,cssc132,veyecam2m.
| + | camera_module_name:could be veye327,csimx307,cssc132,veyecam2m. |
| | | |
| '''Note: veyecam2m is a new version driver that can replace veye327 and supports all modules of the VEYE series with 200W resolution.''' | | '''Note: veyecam2m is a new version driver that can replace veye327 and supports all modules of the VEYE series with 200W resolution.''' |
Line 82: |
Line 82: |
| If you need to change to using the camera by veye_raspicam software, or if you want to change to a driver of another camera module model, you must first uninstall the current driver. | | If you need to change to using the camera by veye_raspicam software, or if you want to change to a driver of another camera module model, you must first uninstall the current driver. |
| | | |
− | <code>sudo ./uninstall_driver.sh [camera module]</code> | + | <code>sudo ./uninstall_driver.sh camera_module_name</code> |
| | | |
− | camera module:could be veye327,csimx307,cssc132,veyecam2m.
| + | camera_module_name:could be veye327,csimx307,cssc132,veyecam2m. |
| | | |
| ==== Camera in FPD-Link3 Mode ==== | | ==== Camera in FPD-Link3 Mode ==== |