Difference between revisions of "C-MOUNT01"

From wiki_veye
Jump to navigation Jump to search
Line 35: Line 35:
 
|}
 
|}
  
=== 调节值A(参考尺寸图)的计算: ===
+
=== 镜头向远离传感器方向偏移距离A(参考尺寸图)的计算: ===
 
镜头向远离传感器方向偏移距离A = C - ( H - D )
 
镜头向远离传感器方向偏移距离A = C - ( H - D )
  

Revision as of 10:50, 14 March 2024

1 Product Picture 产品图片

Product Picture 产品图片 Product Picture 产品图片 Camera Support 支持的相机
C-MOUNT01
C-MOUNT01
MV-MIPI-IMX178M

MV-MIPI-SC130M

MV-MIPI-IMX296M

MV-MIPI-IMX265M

MV-MIPI-IMX264M

RAW-MIPI-IMX462M

2 Attention 注意事项

2.1 Overview 概述

C-MOUNT01仅仅是一个C-MOUNT镜头固定座,为了适配MV系列和RAW系列的,实际后焦距离略小于17.526mm,配合不同型号的摄像机模组,需要将镜头略微向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。

C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series, the actual rear focal distance is less than 17.526mm. With different camera modules,

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

Not adjusted / 未调整 Adjusted / 向外调整
C MOUNT-LENS 02.jpg
C MOUNT-LENS 01.jpg

2.2 镜头向远离传感器方向偏移距离A(参考尺寸图)的计算:

镜头向远离传感器方向偏移距离A = C - ( H - D )

标准C-MOUNT像距 :C = 17.526mm

C-MOUNT01高度:H= 18mm

传感器底面到实际感光面的距离:D

Parameter 参数表
Part NO. / 型号 D (mm) Adjusting Distance (mm) / 调节值A(mm)
MV-MIPI-IMX296M 0.92 0.446
MV-MIPI-IMX178M 0.92 0.446

MV-MIPI-IMX265M

0.92 0.446

MV-MIPI-IMX264M

0.92 0.446

MV-MIPI-IMX287M

0.92 0.446

RAW-MIPI-IMX462M

0.62 0.146
MV-MIPI-SC130M 0.6 0.126

3 Dimension 尺寸图

C-MOUNT01 Dimensional Drawing


4 2D 文件

Download 2D file here

5 3D 文件

Download 3D file here