3,108
edits
Changes
Jump to navigation
Jump to search
Line 16:
Line 16: − '''[[RAW-MIPI-SC132M Index|RAW-MIPI-SC132M]]'''+ + − [[RAW-MIPI-AR0234M Index|'''RAW-MIPI-AR0234M''']]+ − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
→Overview 概述
'''[[MV-MIPI-IMX264M Index|MV-MIPI-IMX264M]]'''
'''[[MV-MIPI-IMX264M Index|MV-MIPI-IMX264M]]'''
[[RAW-MIPI-IMX462M Index|'''RAW-MIPI-IMX462M''']]
|}
== Attention 注意事项 ==
[[RAW-MIPI-IMX462M Index|'''RAW-MIPI-IMX462M''']]
=== Overview 概述 ===
C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列摄像机，'''''<u>实际后焦法兰焦距略小于17.526mm</u>'''''，配合不同型号的摄像机模组，需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。
C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, '''''<u>the actual Flange BFL distance is less than 17.526mm</u>'''''. With different camera modules,
the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.
{| class="wikitable"
!Not adjusted / 未调整
!Adjusted / 向外调整
|-
|[[File:C MOUNT-LENS 02.jpg|thumb]]
|[[File:C MOUNT-LENS 01.jpg|thumb]]
|}
=== 镜头向远离传感器方向偏移距离 “Da” 的计算：Calculation of lens offset distance “Da” away from the sensor ===
'''<big>''Da = Dc - ( H - Ds )''</big>'''
'''法兰后焦距 / Flange BFL''' ：Dc = 17.526mm
'''C-MOUNT01高度 / The Height of C-MOUNT01'''：H= 18mm
'''传感器底面到感光面的距离 / Distance from the bottom of the sensor to the effective image''' '''area'''：Ds
{| class="wikitable"
|+
Parameter 参数表
!Part NO. / 型号
!Ds (mm)
!Da(mm)
|-
|[[MV-MIPI-IMX296M Index|MV-MIPI-IMX296M]]
|0.92
|0.446
|-
|[[MV-MIPI-IMX178 Index|MV-MIPI-IMX178M]]
|0.92
|0.446
|-
|
[[MV-MIPI-IMX265M Index|MV-MIPI-IMX265M]]
|0.92
|0.446
|-
|
[[MV-MIPI-IMX264M Index|MV-MIPI-IMX264M]]
|0.92
|0.446
|-
|
[[MV-MIPI-IMX287M Index|MV-MIPI-IMX287M]]
|0.92
|0.446
|-
|
[[RAW-MIPI-IMX462M Index|RAW-MIPI-IMX462M]]
|0.62
|0.146
|-
|[[MV-MIPI-SC130M Index|MV-MIPI-SC130M]]
|0.6
|0.126
|}
|}