Changes

=== Overview 概述 ===

=== Overview 概述 ===

C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列的，'''''<u>实际后焦距离略小于17.526mm</u>'''''，配合不同型号的摄像机模组，需要将镜头略微向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。

C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列摄像机，'''''<u>实际后焦法兰焦距略小于17.526mm</u>'''''，配合不同型号的摄像机模组，需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。

C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series, '''''<u>the actual rear focal distance is less than 17.526mm</u>'''''. With different camera modules,  

C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, '''''<u>the actual Flange BFL distance is less than 17.526mm</u>'''''. With different camera modules,  

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

|}

|}

=== 调节值A（参考尺寸图）的计算： ===

=== 镜头向远离传感器方向偏移距离 “Da” 的计算：Calculation of lens offset distance “Da” away from the sensor ===

A = C - ( H - D )

'''<big>''Da = Dc - ( H - Ds )''</big>'''

标准C-MOUNT像距 ：C = 17.526mm

'''法兰后焦距 / Flange BFL''' ：Dc = 17.526mm

C-MOUNT01高度：H= 18mm

'''C-MOUNT01高度 / The Height of C-MOUNT01'''：H= 18mm

{| class="wikitable"

{| class="wikitable"

|+

|+

!Part NO. / 型号

!Part NO. / 型号

!D (mm)

!Ds (mm)

!Adjusting Distance (mm) / 调节值A(mm)

!Da(mm)

|-

|-

|[[MV-MIPI-IMX296M Index|MV-MIPI-IMX296M]]

|[[MV-MIPI-IMX296M Index|MV-MIPI-IMX296M]]