Difference between revisions of "CS-LAMP-IR Data Sheet"

From wiki_veye
Jump to navigation Jump to search
Line 25: Line 25:
 
|850nm
 
|850nm
 
|}
 
|}
 +
[[File:CS-LAMP-IR-TOP Interface.jpg|thumb|CS-LAMP-IR-TOP Interface]]
  
 
=='''Interface & Pin list'''==
 
=='''Interface & Pin list'''==
Line 37: Line 38:
 
|GND
 
|GND
 
|}
 
|}
 +
[[File:CS-LAMP-IR-003 BOT Interface.jpg|thumb|CS-LAMP-IR-003 BOT Interface]]
 
'''J2'''  
 
'''J2'''  
 
{| class="wikitable"
 
{| class="wikitable"

Revision as of 10:53, 13 February 2020

查看中文
CS-LAMP-IR Data Sheet

1 Introduction

The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.

The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.

When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.

2 Technical Detail

Technical Detail
Power Supply DC5V
Power Consumption 550mW
Detection Wavelength 390nm~700nm
IR LED Wave Length 850nm
CS-LAMP-IR-TOP Interface

3 Interface & Pin list

J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.

J1

1 DC 5V
2 GND
CS-LAMP-IR-003 BOT Interface

J2

1 NIGHT_O Active High
2 GND
3 NIGHT_O_n   Active Low,  Open-Collector

J4

1 DC 5V
2 GND

J5

1 DC 5V
2 GND

4 Board Dimension


CS-LAMP-IR CAD drawing / unit : mm

Download dwg file here