CS-LAMP-IR Data Sheet

From wiki_veye
Jump to navigation Jump to search

查看中文
CS-LAMP-IR Data Sheet

1 Introduction

The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.

The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.

When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.

2 Technical Detail

Technical Detail
Power Supply DC5V
Power Consumption 550mW
Detection Wavelength 390nm~700nm
IR LED Wave Length 850nm
CS-LAMP-IR-TOP Interface

3 Interface & Pin list

J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.

J1
Pin NO. NAME Remarks
1 DC 5V PWR
2 GND
J2
Pin NO. NAME Remarks
1 NIGHT_O OUTPUT, Active High
2 GND
3 NIGHT_O_n   OUTPUT, Active Low,  Open-Collector
J4
Pin NO. NAME Remarks
1 DC 5V PWR
2 GND
J5
Pin NO. NAME Remarks
1 DC 5V PWR
2 GND

4 Board Dimension


CS-LAMP-IR CAD drawing / unit : mm

Download dwg file here