Line 3: |
Line 3: |
| '''<big><big><big>CS-MIPI-SC132 Data Sheet</big></big></big>''' | | '''<big><big><big>CS-MIPI-SC132 Data Sheet</big></big></big>''' |
| | | |
− | == Introduction == | + | ==Introduction== |
| + | CS-MIPI-SC132 is a cost-effective CSI-2 (MIPI) interface camera module that uses the SC132GS global shutter MONO CMOS sensor whice is [http://www.smartsenstech.com/siteweien/enindex.html SmartSens Technology]‘s SmartGS™ series. CS-MIPI-SC132 supports trigger mode and video stream mode. |
| | | |
− | == Features == | + | ==Features== |
| | | |
− | == Technical Detail ==
| + | * 1/4 inch 1.3m pixel SmartGS™ CMOS sensor |
| + | * Only black and white mode is supported |
| + | * Global shutter |
| + | * Built-in ISP image processing |
| + | * CSI-2 data interface |
| + | * Uncompressed UYVY data format, YUV422-8bit data type |
| + | * Standard lens interface |
| + | * Brightness and contrast can be adjusted |
| + | * Support video stream mode |
| + | * Support trigger mode |
| + | * Support for dynamic firmware upgrade via USB flash drive |
| + | * Support Raspberry PI Platform,RK3399, NVIDIA JETSON Platform |
| | | |
− | == Optical quantum efficiency == | + | ==Technical Detail== |
| + | {| class="wikitable" |
| + | | colspan="2" |'''Technical Details''' |
| + | |- |
| + | | colspan="2" |'''SENSOR''' |
| + | |- |
| + | |Sensor |
| + | |SmartGS™ [http://www.smartsenstech.com/siteweien/ensmartGS.html SC132GS] |
| + | |- |
| + | |Pixels |
| + | |1.3M pixels |
| + | |- |
| + | |Resolution |
| + | |1080H*1280V |
| + | |- |
| + | |Image Size |
| + | |1/4" |
| + | |- |
| + | |Unit Cell Size |
| + | |2.7um (H)*2.7um(V) |
| + | |- |
| + | |Shutter Type |
| + | |Global shutter |
| + | |- |
| + | | colspan="2" |'''ISP''' |
| + | |- |
| + | |Frame Rate |
| + | |1280*1080@45fps,1280*720@60fps, 640*480@120fps |
| + | 1080*1280@45fps, 720*1280@60fps, 480*640@120fps |
| + | |- |
| + | |Exposure |
| + | |自动/手动 |
| + | |- |
| + | |Shutter |
| + | |( 0 - 1 / Frame Rate ) second |
| + | |- |
| + | |Image Setting |
| + | |Brightness, Contrast, Gamma, Flip, Mirror |
| + | |- |
| + | | colspan="2" |'''Image Synchronization mode''' |
| + | |- |
| + | |Free-Run |
| + | | |
| + | |- |
| + | |Soft Trigger |
| + | | |
| + | |- |
| + | |Auto Trigger |
| + | | |
| + | |- |
| + | |Hardware Trigger |
| + | | |
| + | |- |
| + | | colspan="2" |'''Lens''' |
| + | |- |
| + | |Lens |
| + | |MTV12 / MTV16 / CS |
| + | |- |
| + | |Lens Mount |
| + | |M12*P0.5 / M16*P0.5 / CS |
| + | |- |
| + | |Mounting Hole |
| + | |2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| + | |- |
| + | | colspan="2" |'''Interface''' |
| + | |- |
| + | |Connector |
| + | |15PIN FPC, Compatible with Raspberry PI,JETSON NANO |
| + | |- |
| + | |Communication Interface |
| + | |IIC, 3.3VDC |
| + | |- |
| + | |Video Data Interface |
| + | |CSI-2 : 2 Data Lanes |
| + | [[MIPI Introduction|'''''<u>MIPI CSI-2 DC Specifications</u>''''']] |
| + | |- |
| + | | colspan="2" |'''General''' |
| + | |- |
| + | |Operating Conditions |
| + | ('''Bare PCB''') |
| + | |Performance guarantee temperature:'''-20℃~60℃''', Humidity 95% or less, non-condensing |
| + | Operating guarantee temperature: '''-30℃~85℃''', Humidity 95% or less, non-condensing |
| + | |- |
| + | |Power Supply |
| + | |<u>[[Power supply mode switching|5VDC / 3.3VDC]]</u> optional |
| + | |- |
| + | |Power Consumption |
| + | |TBD |
| + | |- |
| + | |Dimension |
| + | |38mm*38mm*10mm(not include lens and lens mount) |
| + | |} |
| + | ==Optical quantum efficiency== |
| | | |
− | == Interface & Pin list == | + | ==Interface & Pin list== |
| | | |
− | == Board Dimension == | + | ==Board Dimension== |