2,021
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − + Line 133:
Line 133: + +
→i2caddr
The cs_mipi_i2c.sh script is a toolset for configuring CS-MIPI-X series cameras through the I2C.
The cs_mipi_i2c.sh script is a toolset for configuring CS-MIPI-X series cameras through the I2C.
=== RaspberryPi Only, Set IO config ===
===RaspberryPi Only, Set IO config===
Include the following files，camera_i2c_config、i2c_read、i2c_write、cs_mipi_i2c.sh.
Include the following files，camera_i2c_config、i2c_read、i2c_write、cs_mipi_i2c.sh.
This module support i2c addr change by software, i2c addr range[0x3,0x77].
This module support i2c addr change by software, i2c addr range[0x3,0x77].
Note: only supported on firmware version >= 1.05
=====paramsave=====
=====paramsave=====
<code>./cs_mipi_i2c.sh -w -f paramsave</code>
<code>./cs_mipi_i2c.sh -w -f paramsave</code>