Line 231: |
Line 231: |
| |0x0 | | |0x0 |
| |Trigger Mode | | |Trigger Mode |
− | |}IR-CUT (Infrared cut-off filter) is a mechanical shutter design. It is placed between the lens and the image sensor, and is controlled by a motor or an electromagnet. | + | |- |
| + | |0x3 |
| + | |IR-CUT day, Image Black&White mode |
| + | |- |
| + | |0x4 |
| + | |IR-CUT night, Image Color mode |
| + | |} |
| + | IR-CUT (Infrared cut-off filter) is a mechanical shutter design. It is placed between the lens and the image sensor, and is controlled by a motor or an electromagnet. |
| | | |
| IR-CUT has two status: '''Block''' or '''Deliver''' the infrared. | | IR-CUT has two status: '''Block''' or '''Deliver''' the infrared. |
| | | |
− | *Color Mode | + | * Color Mode |
| | | |
− | Image is Color Mode and IR_CUT status '''Block''' infrared. | + | Image is '''Color''' Mode and IR_CUT status '''Block''' infrared. |
| | | |
− | *Black&White Mode | + | * Black&White Mode |
| | | |
− | Image is Black&White Mode and IR_CUT status '''Deliver''' infrared. | + | Image is '''Black&White''' Mode and IR_CUT status '''Deliver''' infrared. |
| | | |
− | *Trigger Mode | + | * Trigger Mode |
| | | |
| Trigger pin : [[CS-MIPI-IMX307 STARVIS Module|J4 pin1]]. | | Trigger pin : [[CS-MIPI-IMX307 STARVIS Module|J4 pin1]]. |
Line 250: |
Line 257: |
| | | |
| Trigger pin Low(GND),Image is Color Mode and IR-CUT status '''Bolck''' infrared. | | Trigger pin Low(GND),Image is Color Mode and IR-CUT status '''Bolck''' infrared. |
| + | |
| + | * IR-CUT day, Image black&white mode |
| + | |
| + | Image is '''Black&White''' Mode and IR_CUT status '''Block''' infrared. |
| + | |
| + | * IR-CUT night, Image color mode |
| + | |
| + | Image is '''Color''' Mode and IR_CUT status '''Deliver''' infrared. |
| + | |
| =====hue===== | | =====hue===== |
| <code>./cs_mipi_i2c.sh -r -f hue</code> | | <code>./cs_mipi_i2c.sh -r -f hue</code> |