Line 526: |
Line 526: |
| |Fully reboot (6-8s) | | |Fully reboot (6-8s) |
| |} | | |} |
− | <br /> | + | |
| + | ===== ledstrobe ===== |
| + | <code>./cs_mipi_i2c.sh -w -f ledstrobe -p1 enable</code> |
| + | |
| + | Whether the LED synchronization signal is enabled. |
| + | |
| + | If enabled, the Strobe IO pin outputs a high level when the sensor is exposed. |
| + | |
| + | note: 仅CS-MIPI-SC132支持。<br /> |