3,108
edits
Changes
Jump to navigation
Jump to search
Line 22:
Line 22: − + Line 38:
Line 38: − + Line 59:
Line 59: + + − support functions: devid,hdver,camcap,firmwarever,productmodel,videofmtcap,videofmt,ispcap,i2caddr,streammode,powerhz,+ − + − daynightmode ,hue ,contrast , satu , expostate , wbstate ,expmode , aetarget, aetime,aeagc,metime ,meagain , medgain , awbmode , mwbcolortemp , mwbgain,imagedir,sreg,striggerone,triggeredge,autotgcnt,tgdebncr,tgdly,pickmode,discardfrm,pickone,mipistatus,sysreboot,sysreset,paramsave − − − Pi3B / Pi3B+ / 3A / 4B(1G/2G/4G)，we use i2c0 − − Compute Module/ CM3，we use i2c1,please add '''-b 1''' option. Line 76:
Line 72: − + Line 127:
Line 123: + Line 147:
Line 144: − + + + + + + + + − + + + + + + + + + + + + + Line 241:
Line 257: − + Line 329:
Line 345: + + Line 393:
Line 411: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 416:
Line 472: − + Line 428:
Line 484: − + Line 494:
Line 550: − + − + Line 508:
Line 564: − + Line 580:
Line 636: − + + + + + + + + + + + +
→hdver
<code>./camera_i2c_config</code>
<code>./camera_i2c_config</code>
*for RPI Computer Module
*for RPI Computer Module 3
<code>./camera_i2c_config [cameranum]</code>
<code>./camera_i2c_config [cameranum]</code>
./cs_mipi_i2c.sh
./cs_mipi_i2c.sh
this shell scripts should be used for CS-MIPI-IMX307!
this shell scripts should be used for CS-MIPI-X!
Usage: ./cs_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -p3 param3 -b bus
Usage: ./cs_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -p3 param3 -b bus
-d [i2c addr] i2c addr if not default 0x3b
-d [i2c addr] i2c addr if not default 0x3b
=== i2c bus number on different board ===
Please refer to the following article to determine which -b parameter you need to use.
[[I2c bus number and video node|i2c bus number on different boards]]
===Functions list===
=====devid=====
=====devid=====
<code>./cs_mipi_i2c.sh -r -f devid</code>
<code>./cs_mipi_i2c.sh -r -f devid</code>
|}
|}
=====hdver=====
=====hdver=====
<code>./veye_mipi_i2c.sh -r -f hdver</code>
<code>./cs_mipi_i2c.sh -r -f hdver</code>
get hardware logic version
get hardware logic version
<code>./cs_mipi_i2c.sh -r -f videofmt</code>
<code>./cs_mipi_i2c.sh -r -f videofmt</code>
====== old version videofmt write ======
<code>./cs_mipi_i2c.sh -w -f videofmt -p1 1920 -p2 1080 -p3 10</code>
<code>./cs_mipi_i2c.sh -w -f videofmt -p1 1920 -p2 1080 -p3 10</code>
CS-MIPI-SC132framerate range: [2,maxframerate]
CS-MIPI-SC132framerate range: [2,maxframerate]
note：sync mode do not support '''framerate continuously adjustable.'''
note：sync mode do not support '''framerate continuously adjustable.'''
====== new version videofmt write ======
Note: supported on CS-MIPI-IMX307 firmware > V2.35.
<code>./cs_mipi_i2c.sh -w -f videofmt -p1 1920 -p2 1080 -p4 0.20</code>
p4 parameter, which supports the decimal frame rate function and is used to support manual exposure mode for more than 1 second.
=====ispcap=====
=====ispcap=====
<code>./cs_mipi_i2c.sh -r -f ispcap</code>
<code>./cs_mipi_i2c.sh -r -f ispcap</code>
get camera isp capbility. Will add details later.
get camera isp capbility.
bit0 : CSC hue,contrast,saturation
bit1 : AE auto exposure
bit2 : ME manual exposure
bit3 : AWB auto white balance
bit4 : MWB manual white balance
bit5 : DME direct manual exposure
=====powerhz=====
=====powerhz=====
<code>./cs_mipi_i2c.sh -r -f powerhz</code>
<code>./cs_mipi_i2c.sh -r -f powerhz</code>
If powerhz is 50，support 1080p@25，720p@50,vga@130.
If powerhz is 50，support 1080p@25，720p@50,vga@130.
Note: only supported on camcap bit 0 is 1.
Note: only supported on camcap bit 0 is 1. Streammode is the base, and parameters such as exposure need to be reconfigured after modifying streammode.
*Trigger mode
*Trigger mode
1: manual exposure
1: manual exposure
2: direct manual exposure，skip isp，write to sensor registers. CS-MIPI-SC132 only.
=====aetarget=====
=====aetarget=====
<code>./cs_mipi_i2c.sh -r -f aetarget</code>
<code>./cs_mipi_i2c.sh -r -f aetarget</code>
manual dgain，dB. Effective when '''expmode''' is manual.
manual dgain，dB. Effective when '''expmode''' is manual.
X is the integer part and Y is the decimal part, for example X is 2 and Y is 3 means 2.3dB.
X range: depending on sensor.
Y range: [0-9].
IMX307,dgain range is[0,42]dB, step 0.3dB.
=====dmetime=====
<code>./cs_mipi_i2c.sh -r -f dmetime</code>
<code>./cs_mipi_i2c.sh -w -f dmetime -p1 10000</code>
direct manual exposure time, us. Effective when '''expmode''' is direct manual.
range:[0-1000000/framerate]
If you need ultra-long exposure, you need to adjust the framerate to match this parameter.
=====dmeagain=====
<code>./cs_mipi_i2c.sh -w -f dmeagain -p1 X -p2 Y</code>
<code>./cs_mipi_i2c.sh -r -f dmeagain</code>
direct manual again，dB. Effective when '''expmode''' is direct manual.
X is the integer part and Y is the decimal part, for example X is 2 and Y is 3 means 2.3dB.
X range: depending on sensor.
Y range: [0-9].
IMX307,again range is[0,27]dB, step 0.3dB.
=====dmedgain=====
<code>./cs_mipi_i2c.sh -w -f dmedgain -p1 X -p2 Y</code>
<code>./cs_mipi_i2c.sh -r -f dmedgain</code>
direct manual dgain，dB. Effective when '''expmode''' is direct manual.
X is the integer part and Y is the decimal part, for example X is 2 and Y is 3 means 2.3dB.
X is the integer part and Y is the decimal part, for example X is 2 and Y is 3 means 2.3dB.
<code>./cs_mipi_i2c.sh -r -f mwbgain</code>
<code>./cs_mipi_i2c.sh -r -f mwbgain</code>
manual white balance mode, set rgain and dgain manually, ggain is always 1.
manual white balance mode, set rgain and bgain manually, ggain is always 1.
GAIN is 4-bit decimal precision, for example: 0x23 means 2+3/16=2.19.
GAIN is 4-bit decimal precision, for example: 0x23 means 2+3/16=2.19.
<code>./cs_mipi_i2c.sh -r -f expostate</code>
<code>./cs_mipi_i2c.sh -r -f expostate</code>
readonly, get the current exposure state. exposure time, again and dgain.
readonly, get the current exposure state. exposure time, again and dgain. direct manual exposure mode invalid.
=====wbstate=====
=====wbstate=====
<code>./cs_mipi_i2c.sh -r -f wbstate</code>
<code>./cs_mipi_i2c.sh -r -f wbstate</code>
=====tgdebncr=====
=====tgdebncr=====
<code>./cs_mipi_i2c.sh -w -f triggeredge -p1 enable -p2 [value]</code>
<code>./cs_mipi_i2c.sh -w -f tgdebncr -p1 enable -p2 [value]</code>
<code>./cs_mipi_i2c.sh -r -f triggeredge</code><br />In Hardware Trigger mode，the debouncer attribute of the trigger signal.
<code>./cs_mipi_i2c.sh -r -f tgdebncr</code><br />In Hardware Trigger mode，the debouncer attribute of the trigger signal.
Any trigger signal that is less than value (us) will be ignored.
Any trigger signal that is less than value (us) will be ignored.
Trigger delay in Hardware Trigger mode (us).<br />note: Only CS-MIPI-SC132 Support.
Trigger delay in Hardware Trigger mode (us).<br />note: Only CS-MIPI-SC132 Support.
=====pickmode=====
=====pickmode=====
<code>./cs_mipi_i2c.sh -w -f pickmode -p1 enable</code>
<code>./cs_mipi_i2c.sh -w -f pickmode -p1 [0/1]</code>
<code>./cs_mipi_i2c.sh -r -f pickmode</code>
<code>./cs_mipi_i2c.sh -r -f pickmode</code>
Y range: [0-9].
Y range: [0-9].
Note: only supported on firmware version >= 2.32<br />
Note: only supported on firmware version >= 2.32
===== yuvseq =====
<code>./veye_mipi_i2c.sh -w -f yuvseq -p1 YUYV</code>
<code>./veye_mipi_i2c.sh -w -f yuvseq -p1 UYVY</code>
<code>./veye_mipi_i2c.sh -r -f yuvseq</code>
Set yuv seq of camera.
Note: only supported on firmware version >= 2.38<br />