2,021
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: − + + + + + + + + +
FPD LINK III for Jetson (view source)
Revision as of 16:55, 6 November 2020
, 16:55, 6 November 2020→Introduction
FPD-Link SerDes III is a coaxial remote transmission scheme of video stream provided by TI. We have designed [[FPD-LINK3-TX Data Sheet index|FPD-LINK3-TX]] and [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] boards, which can realize coaxial transmission of 1 or 2 channels of MIPI CSI-2 images, and the transmission distance can be up to 8meters(RG174 RF Cable) or 10meters(RG58 RF Cable).
FPD-Link SerDes III is a coaxial remote transmission scheme of video stream provided by TI. We have designed [[FPD-LINK3-TX Data Sheet index|FPD-LINK3-TX]] and [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] boards, which can realize coaxial transmission of 1 or 2 channels of MIPI CSI-2 images, and the transmission distance can be up to 8meters(RG174 RF Cable) or 10meters(RG58 RF Cable).
On Jetson Nano/NX platform, a set of [[FPD-LINK3-TX Data Sheet index|FPD-LINK3-TX]] and [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] boards are used to realize the remote transmission of 1-channel video. The I2C address of the camera after initialization configuration is the same as that of the original camera.On [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] board,fpdlink channel is from port0(J3) to J9.
On Jetson Nano/NX platform, a set of [[FPD-LINK3-TX Data Sheet index|FPD-LINK3-TX]] and [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] boards are used to realize the remote transmission of 1-channel video. The I2C address of the camera after initialization configuration is the same as that of the original camera.On [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] board, fpdlink channel is from port0(J3) to J9.
On Jetson TX2/AGX Xavier platform, a set of [[FPD-LINK3-TX Data Sheet index|FPD-LINK3-TX]] and [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] boards are used to realize the remote transmission of 2-channel video. On [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]] board, fpdlink channel is from port0(J3) and port1(J4) to J7. J7 is a MIPI interface of 4 lan, which supports two independent camera data transmission through virtual channel technology.
For application layer, it support all MIPI camera functions, including image, i2C communication, synchronous IO and trigger IO.
Therefore, when using CS-FPD-CAM, you must refer to the following article:
* [[VEYE CS Camera for Jetson TX2|How to use VEYE and CS camera module on NVIDIA Jetson TX2 and AGX Xavier]]
== Hardware Setup ==
== Hardware Setup ==