1,602
edits
Changes
Jump to navigation
Jump to search
Line 18:
Line 18: − + + + + +
→硬件准备及安装
[[File:XAVIER-FPDLINK3-4cam.jpg|center|thumb|600x600px|AGX XAVIER connnect with CS-FPD-CAMs]]
[[File:XAVIER-FPDLINK3-4cam.jpg|center|thumb|600x600px|AGX XAVIER connnect with CS-FPD-CAMs]]
[[File:TX2-FPDLINK3-4cams.jpg|center|thumb|600x600px|TX2 connect with CS-FPD-CAMs]]
[[File:TX2-FPDLINK3-4cams.jpg|center|thumb|600x600px|TX2 connect with CS-FPD-CAMs]]
<br />注：[[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]]需要12V供电。
<br />注：
# [[FPD-LINK3-2RX Data Sheet index|FPD-LINK3-2RX]]需要12V供电。
2. FPD-LINK3-2RX需要不晚于Xavier主板供电。因为Xavier会在启动阶段探测外设。
== 更新Jetson系统 ==
== 更新Jetson系统 ==
与[[VEYE CS Camera for Jetson TX2/zh#.E6.9B.B4.E6.96.B0Jetson Nano.2C Jetson TX2.EF.BC.8CAGX Xavier.E5.92.8CXavier NX.E7.B3.BB.E7.BB.9F|更新Jetson Nano, Jetson TX2，AGX Xavier和Xavier NX系统]]步骤基本一致，注意dts、dtb、均采用fpdlink后缀的版本即可。driver源代码和Image，兼容FPD-Link和MIPI接口摄像头。
与[[VEYE CS Camera for Jetson TX2/zh#.E6.9B.B4.E6.96.B0Jetson Nano.2C Jetson TX2.EF.BC.8CAGX Xavier.E5.92.8CXavier NX.E7.B3.BB.E7.BB.9F|更新Jetson Nano, Jetson TX2，AGX Xavier和Xavier NX系统]]步骤基本一致，注意dts、dtb、均采用fpdlink后缀的版本即可。driver源代码和Image，兼容FPD-Link和MIPI接口摄像头。