MV-MIPI-SC130M Data Sheet

From wiki_veye
Revision as of 15:15, 21 June 2022 by Ezcam (talk | contribs)
Jump to navigation Jump to search

查看中文

MV-MIPI-SC130M Data Sheet

1 Introduction

MV-MIPI-SC130M is a 1.3 million MONO industrial camera with MIPI interface.

This camera has a small size (29*29mm) and rich functions, so it is suitable for integration as an image acquisition component.

MV-MIPI-SC130M

2 Features

  • 1/2.7'' 1.3M Pixel SmartGS® CMOS SENSOR
  • MIPI CSI-2 Interface
  • Mono-8、Mono-10 Data Format
  • Video streaming mode(Free Running),Trigger mode
  • Hardware and Software trigger source
  • Support trigger frame number, interval, delay, trigger filter function
  • Strobe synchronization
  • ROI
  • USER Output
  • Flexible frame rate settings
MV-MIPI-SC130M

3 Technical Detail

Technical Details
Sensor Type CMOS
Shutter Mode Global Shutter
Sensor SmartGS® SC130GS-M
Color MONO
Image Size 1/2.7''
Unit Cell Size 4μm × 4μm
Resolution 1088(H) × 1032(V)
Max Frame Rate 1280 × 1024@108fps
Gain 0-40dB,0.1dB step
Exposure Time ≤ 1/(max frame rate)
Shutter Mode AE,ME,AE Once
ISP Bad Pixel Correction,8bit GAMMA,User Lookup Table
ADC Resolution 10 bit
Pixel Format Mono8,Mono10,UYVY 8bit
ROI Support
Mirror Image Mirror and Flip
Working Mode Hardware Trigger,Software Trigger,Video streaming mode(Free Running)
Trigger Mode Trigger Filtering,Trigger Delay,Trigger Polarity Control
Strobe Mode Strobe Output Control,Strobe Delay,Strobe Polarity Control
Electrical characteristics
Data Interface CSI-2 : 2 Data Lanes

Data Rate / lane:1.5Gbps

Communication Interface I2C 3.3V
Digital IO Non-isolation IO:1 Trigger in,2 Multi-function output,3.3V Level
Power Supply 5VDC
Power Consumption 1.0W@ 5V DC
Structure
Size Length * width * height = 29*29*11mm
Lens Mount C-MOUNT01
Operating Conditions
Temperature Operating temperature:-30℃~ 60℃
Humidity Humidity 95% or less

4 Spectral Sensitivity Characteristics

Sensor Spectral Sensitivity
SC130GS-M
SC130GS-M QE

5 Interface & Pin list

MV-MIPI-SC130M
MV-MIPI-SC130M
J3: CSI-2 Interface,Up Contact
Pin NO. NAME Remarks
1 GND
2 VCC 5V
3 VCC 5V
4 VCC 5V
5 VCC 5V
6 GND
7 ENABLE Power Enable
8 GND
9 MIPI_L0_N Lane 0 Negative
10 MIPI_L0_P Lane 0 Positive
11 GND
12 MIPI_L1_N Lane 1 Negative
13 MIPI_L1_P Lane 1 Positive
14 GND
15 MIPI_CK_N CLK Negative
16 MIPI_CK_P CLK Positive
17 GND
18 MIPI_L2_N Reserved
19 MIPI_L2_P Reserved
20 GND
21 MIPI_L3_N Reserved
22 MIPI_L3_P Reserved
23 GND
24 SCL I2C SCL, 3.3V Level
25 SDA I2C SDA, 3.3V Level
26 GPIO3 Reserved
27 OUT_IO2 Multi-function Port 2,3.3V level
28 OUT_IO1 Multi-function Port 1,3.3V level
29 TriggerIN_IO Hardware Trigger in,3.3V level
30 GND

6 Board Dimension

Download dwg file here

7 PCBA 3D STP File

download 3D STP file