2,021
edits
Changes
Jump to navigation
Jump to search
Line 95:
Line 95: − + Line 124:
Line 124: − + Line 470:
Line 470: − ===Question Feedback=== − We are committed to providing richer possibilities for image applications on embedded platforms. Therefore, our software for embedded platforms is based on the principle of open source. − − If you have any questions or suggestions about our existing software, please feel free to submit them to the [http://forum.veye.cc/ forum] or email our technical staff at xumm#csoneplus.com.
→Check system status
We provide a deb installation package that can be installed directly.
We provide a deb installation package that can be installed directly.
====Burn Radxa standard system====
====Burn Radxa standard system====
Refer to the [https://wiki.t-firefly.com/en/ROC-RK3566-PC/01-bootmode.html Radxa documentation] to burn in a standard system.
Refer to the Radxa documentation to burn in a standard system.
====Using prebuilt Image and dtb file====
====Using prebuilt Image and dtb file====
Using the compiled debain installation package
Using the compiled debain installation package
You can see the camera model and the camera version number probed.
You can see the camera model and the camera version number probed.
A prompt as below indicates that the MV-MIPI-IMX296M camera is detected on the i2c-7 bus.
A prompt as below indicates that the MV-MIPI-IMX296M camera is detected on the i2c-2 bus.
<code>mvcam 2-003b: camera is：MV-MIPI-IMX296M</code>
<code>mvcam 2-003b: camera is：MV-MIPI-IMX296M</code>
[[mv_mipi_i2c.sh user guide]]
[[mv_mipi_i2c.sh user guide]]
===Compile drivers and dtb from source code===
===Compile drivers and dtb from source code===