MV Series MIPI Camera Register Map

查看中文

1 Overview

1.1 Register Features

The register address length is 4 bytes and the data length is 2 bytes.

Register R/W attributes: RW, RO, WO. Only the RW type can be saved to the camera flash.

Register values have several types: uint（unsigned int）, bool, enum, ascii.

1.2 I2c communication protocol

The module supports parameter configuration via i2c protocol. The default i2c slave address of the camera is 0x3b which can be modified.
I2c data input order is MSB-first transfer.

We provide open source shell scripts under Linux to help read and write each register.

The script function column in the following table indicates the function name in the shell script corresponding to this register.

1.3 Update timing

The camera has two states, standby and running, after the start of image acquisition into the running state.

In the following table, Update timing possible value is:

A: Read and write at any time.

S: Read only at Running state.

-: Read only at any time.

2 Basic Parameters

Address	Name	Description	Data Type	R/W	Update timing	script function
0x0000	Manufacturer Name		ascii	RO	-	manufacturer
0x0004	Model Name		enum	RO	-	model
0x0008	Sensor Name		enum	RO	-
0x000C	Serial Number		uint	RO	-
0x0010	Device Version		uint	RO	-	version
0x0014	Factory Param		bool	WO	A	factoryparam
0x0018	Param save to flash		bool	WO	A	paramsave
0x001C	System reboot		bool	WO	A	reboot
0x0020	Time stamp		uint	RO	-	timestamp
0x0024	Error Code		uint	RO	-	errcode

3 Image Acquisition

Address	Name	Description	Data Type	R/W	Update timing	script function
0x0400	Image Acquisition		bool	WO	A	imgacq
0x0404	Trigger Mode		enum	RW	S	trgmode
0x0408	Trigger Source		enum	RW	S	trgsrc
0x040C	Trigger Number		uint	RW	S	trgnum
0x0410	Trigger Interval		uint	RW	S	trginterval
0x0414	Trigger Software		bool	WO	A	trgone
0x0418	Trigger Count		uint	RW	A	trgcount
0x041C	I2C ADDR		uint	RW	A	i2caddr

4 Image Features

Address	Name	Description	Data Type	R/W	Update timing	script function
0x0800	Test Image Selector		uint	RW	A	testimg
0x0804	Pixel Format		enum	RW	A	pixelformat
0x0808	Sensor Width		uint	RO	-	maxwh
0x080C	Sensor Height		uint	RO	-	maxwh
0x0810	MaxFrame Rate		uint	RO	-	maxfps
0x0814	Framerate		uint	RW	S	fps
0x0818	ROI Width		uint	RW	S	roi
0x081C	ROI Height		uint	RW	S	roi
0x0820	ROI Offset X		uint	RW	S	roi
0x0824	ROI Offset Y		uint	RW	S	roi
0x0828	Image Direction		enum	RW	A	imgdir
0x0830	Black Level		uint	RW	A	blacklevel

5 ISP

Address	Name	Description	Data Type	R/W	Update timing	script function
0x0C00	ISP module ctrl		uint	RW	A	gammaenable, dpcenable, lutenable,
0x0C04	Exposure Mode		enum	RW	A	expmode
0x0C08	Target Brightness		uint	RW	A	aatarget
0x0C10	ME Time		uint	RW	A	metime
0x0C14	AE MAX Time		uint	RW	A	aemaxtime
0x0C18	Exp Time		uint	RO	-	exptime
0x0C1C	Gain Mode		enum	RW	A	gainmode
0x0C20	Manual Gain		uint	RW	A	mgain
0x0C24	AG Max Gain		uint	RW	A	agmaxgain
0x0C28	Cur Gain		uint	RO	-	curgain
0x0C2C	AAROIOffsetX		uint	RW	A	aaroi
0x0C30	AAROIOffsetY		uint	RW	A	aaroi
0x0C34	AAROIWidth		uint	RW	A	aaroi
0x0C38	AAROIHeight		uint	RW	A	aaroi
0x0C60	Gamma		uint	RW	A	gamma
0x0C74	LUT Count		uint	RO	-	lut
0x0C78	LUT Start		bool	WO	A	lut
0x0C7C	LUT Done		bool	WO	A	lut
0x0C80	AAROI enable		bool	RW	A	aaroienable

6 IO Control

Address	Name	Description	Data Type	R/W	Update timing	script function
0x1000	Trigger Delay		uint	RW	S	trgdelay
0x1004	Trigger Activation		uint	RW	S	trgedge
0x1008	Trigger Filter Enable		uint	RW	S	trgfilter_enable
0x100c	Trigger Filter Width		uint	RW	S	trgfilter_time
0x1010	Exposure Delay		uint	RW	S	trgexp_delay
0x1014	TriggerIN IO status		enum	RO	-	gpios_status
0x1020	GPIO1_OutSelect		uint	RW	A	outio1_mode
0x1024	GPIO1 UserOut		enum	RW	A	outio1_usr
0x1028	GPIO1 Reverse		bool	RW	A	outio1_rvs
0x102C	GPIO1 OutStatus		enum	RO	-	gpios_status
0x1030	GPIO2_OutSelect		uint	RW	A	outio2_mode
0x1034	GPIO2 UserOut		enum	RW	A	outio2_usr
0x1038	GPIO2 Reverse		bool	RW	A	outio2_rvs
0x103C	GPIO2 OutStatus		enum	RO	-	gpios_status

7 Special Block Area

0x1800-0x37FF : lut area.