Line 81: |
Line 81: |
| | | |
| 0x8132 : RAW-MIPI-SC132M | | 0x8132 : RAW-MIPI-SC132M |
| + | |
| + | 0x8234 : RAW-MIPI-AR0234M |
| + | |
| + | 0x8462 : RAW-MIPI-IMX462M |
| |enum | | |enum |
| |RO | | |RO |
Line 104: |
Line 108: |
| | | |
| 0x132 : SC132GS | | 0x132 : SC132GS |
| + | |
| + | 0x234 : AR0234CS |
| + | |
| + | 0x462 : IMX462LLR |
| |enum | | |enum |
| |RO | | |RO |
Line 313: |
Line 321: |
| |- | | |- |
| |0x044C | | |0x044C |
− | |Non discontinuesmode | + | |Non discontinuous mode |
− | |Indicates whether the clock lan of the mipi signal is in continuous clock mode. 0 : discontinues mode,1: continues mode | + | |Indicates whether the clock lan of the mipi signal is in continuous clock mode. 0 : discontinuous mode,1: continuous mode |
| |bool | | |bool |
| |RO | | |RO |
Line 337: |
Line 345: |
| |A | | |A |
| |snsreg | | |snsreg |
| + | |S |
| + | |- |
| + | |0x0460 |
| + | |Slave mode |
| + | |Whether the sensor is operating in slave mode. Currently, only RAW-MIPI-IMX462M is supported. |
| + | |bool |
| + | |RW |
| + | |S |
| + | |slavemode |
| |S | | |S |
| |} | | |} |
Line 379: |
Line 396: |
| |enum | | |enum |
| |RW | | |RW |
− | |A | + | |S |
| |pixelformat | | |pixelformat |
| |S | | |S |
Line 483: |
Line 500: |
| |A | | |A |
| |blacklevel | | |blacklevel |
| + | |S |
| + | |- |
| + | |0x0834 |
| + | |BLC mode |
| + | |Black level calibration modes: |
| + | 0: Sensor automatic calibration or use default black level. |
| + | |
| + | 1: Manually specify black level. |
| + | |uint |
| + | |RW |
| + | |A |
| + | |blcmode |
| + | |S |
| + | |- |
| + | |0x083C |
| + | |Lane Num |
| + | |For modules that support lane number configuration, use this register to modify the lane number. |
| + | |uint |
| + | |RW |
| + | |S |
| + | |lanenum |
| + | |S |
| + | |- |
| + | |0x0840 |
| + | |MIPI Datarate |
| + | |The MIPI datarate for each lane, measured in Kbps. |
| + | |uint |
| + | |RO |
| + | | - |
| + | |mipidatarate |
| |S | | |S |
| |} | | |} |