1,602
edits
Changes
Jump to navigation
Jump to search
Line 81:
Line 81: − + + + Line 90:
Line 92: + + + + + + + + + + + + + + + + + +
→IO Control
Definition of total trigger number: in hard trigger mode, it is the number of triggers after trigger filtering; in soft trigger mode, it is the number of all triggers.
Definition of total trigger number: in hard trigger mode, it is the number of triggers after trigger filtering; in soft trigger mode, it is the number of all triggers.
When the camera receives a trigger signal, it will not be able to respond to the new trigger signal if it is in the trigger cycle, which will cause the loss of the trigger signal.Related commands ：trgcount, trgclr.
When the camera receives a trigger signal, it will not be able to respond to the new trigger signal if it is in the trigger cycle, which will cause the loss of the trigger signal.
Related commands ：trgcount, trgclr.
===Image Feature===
===Image Feature===
==== Input IO Configuration ====
==== Input IO Configuration ====
Now there is only one input pin: TriggerIN_IO. The function is: input signal for hard trigger.
The active edge of the trigger signal can be configured via the ''Trigger Edge'' function.
Related commands ：trgedge.
===== Trigger Filter =====
In order to suppress the interference in the external trigger signal, MV series cameras have external trigger filtering function, including low level filtering and high level filtering.
The function of low level filtering is to filter out the interference signal on the low level, and the function of high level filtering is to filter out the interference signal on the high level.
The range of the filtering window can be set to [1,1000000]us.
Related commands ：trgfilter_enable，trgfilter_time.
===== Trigger Delay =====
===== Pin Reverse =====
==== Output IO Configuration ====
==== Output IO Configuration ====
==== Read pin status ====
==== Read pin status ====