1,602
edits
Changes
Jump to navigation
Jump to search
Line 46:
Line 46: − TODO+ + + + + + + + + Line 96:
Line 104: − + + + + + Line 129:
Line 141: + + + + + + + + + + + + + + + + + + + Line 153:
Line 184: + + + + + + + + +
→Start/Stop Acquisition
[[File:Rolling shutter Normal trigger mode new2.png|alt=|center|thumb|799x799px|Normal trigger mode( Rolling shutter)]]
[[File:Rolling shutter Normal trigger mode new2.png|alt=|center|thumb|799x799px|Normal trigger mode( Rolling shutter)]]
===== Global shutter =====
===== Global shutter =====
For a global shutter sensor, such as the SC130GS, a complete image frame requires an exposure time and a read out cycle to complete. The second frame can be exposed only after the read out cycle is completed.
In normal trigger mode, for the global shutter sensor, we call one exp time and one read out cycle a '''''trigger cycle'''''.
Therefore the maximum frame rate in trigger mode is influenced by the length of the exposure time.
The following figure shows an example of a trigger period with Trigger Number set to 2：
[[File:Normal trigger mode (Global shutter).png|center|thumb|800x800px|Normal trigger mode (Global shutter)]]
<br />
==== High-speed continuous trigger mode ====
==== High-speed continuous trigger mode ====
|MV-MIPI-IMX178M
|MV-MIPI-IMX178M
|Mono8，Mono10，Mono12
|Mono8，Mono10，Mono12
|sensor output data is always12bit-depth
|sensor AD is 12bit-depth
|-
|MV-MIPI-SC130M
|Mono8，Mono10
|sensor AD is 10bit-depth
|}
|}
Related commands ：fmtcap, pixelformat.
Related commands ：fmtcap, pixelformat.
| 1920 x 1080
| 1920 x 1080
|67
|67
|
|}
{| class="wikitable"
!model
!size
! max framerate
!Note
|-
| rowspan="3" |MV-MIPI-SC130M
|1280 × 1024
|108
|Max size
|-
|1280 x 720
|152
|
|-
|640 x 480
|223
|
|
|}
|}
|MV-MIPI-IMX178M
|MV-MIPI-IMX178M
|376 x 320
|376 x 320
|
|}
{| class="wikitable"
!model
!minimum ROI area
!Note
|-
| MV-MIPI-SC130M
|64 x 64
|
|
|}The camera will make necessary adjustments to the user parameters to meet the parameter requirements.
|}The camera will make necessary adjustments to the user parameters to meet the parameter requirements.