1,602
edits
Changes
Jump to navigation
Jump to search
Line 25:
Line 25: − +
Mvcam firmware update manual (view source)
Revision as of 10:42, 29 March 2023
, 10:42, 29 March 2023→Upgrading
Confirm that the camera module is powered up.
Confirm that the camera module is powered up.
Using v4l2 driver mode, the power up and probe process will be performed during the linux boot process.
Using v4l2 driver mode, the power up and probe process will be performed during the linux boot process. Just power on the board and it should work.
In particular, for the legacy mode of the Raspberry Pi, you need to execute camera_i2c_config to power up the camera.
In particular, for the legacy mode of the Raspberry Pi, you need to execute camera_i2c_config to power up the camera.