Line 17: |
Line 17: |
| *Connect Dupont Wire as shown below. CS-MIPI-X need an addtional power. | | *Connect Dupont Wire as shown below. CS-MIPI-X need an addtional power. |
| *Startup RaspberryPi. | | *Startup RaspberryPi. |
| + | *'''The default power supply mode of CS-MIPI-SC132 is 3.3V via FFC cable, and there is no need to plug in red and black power cable.''' |
| | | |
| [[File:CS-MIPI-IMX307树莓派连接图001.jpg|center|thumb|600x600px|connect CS-MIPI-X to Raspberry Pi 001(CS-MIPI-IMX307 as an example)]] | | [[File:CS-MIPI-IMX307树莓派连接图001.jpg|center|thumb|600x600px|connect CS-MIPI-X to Raspberry Pi 001(CS-MIPI-IMX307 as an example)]] |
Line 24: |
Line 25: |
| [[File:CS-MIPI-IMX307树莓派连接图004.jpg|center|thumb|600x600px|connect CS-MIPI-X to Raspberry Pi 004(CS-MIPI-IMX307 as an example)]] | | [[File:CS-MIPI-IMX307树莓派连接图004.jpg|center|thumb|600x600px|connect CS-MIPI-X to Raspberry Pi 004(CS-MIPI-IMX307 as an example)]] |
| [[File:CS-MIPI-IMX307树莓派连接图005.jpg|center|thumb|600x600px|connect CS-MIPI-X to Raspberry Pi 005(CS-MIPI-IMX307 as an example)]] | | [[File:CS-MIPI-IMX307树莓派连接图005.jpg|center|thumb|600x600px|connect CS-MIPI-X to Raspberry Pi 005(CS-MIPI-IMX307 as an example)]] |
| + | [[File:CS-MIPI-SC132-N005.jpg|alt=connect CS-MIPI-SC132 to Raspberry Pi|center|thumb|600x600px|connect CS-MIPI-SC132 to Raspberry Pi]] |
| | | |
| | | |
Line 97: |
Line 99: |
| | | |
| =====veye_raspivid (video encoding and record)===== | | =====veye_raspivid (video encoding and record)===== |
− | <code>./veye_raspivid -md 1 -t 5000 -o ~/test.h264</code> | + | <code>./veye_raspivid -t 5000 -w 1280 -h 720 -fps 60 -stm -o ~/test.h264</code> |
| | | |
| Implement H.264 format encoding(720p@60) and record for 5 seconds,Record the stream data to file ~/test.h264. | | Implement H.264 format encoding(720p@60) and record for 5 seconds,Record the stream data to file ~/test.h264. |
Line 184: |
Line 186: |
| <code>sudo apt-get install libzbar-dev</code> | | <code>sudo apt-get install libzbar-dev</code> |
| | | |
− | ===== Video Format Description ===== | + | =====Video Format Description===== |
| D-SDK does not configure any parameters for the module. To config the module, please refer to: Video Control Toolkits Manual : [[CS-MIPI-X i2c]]。 | | D-SDK does not configure any parameters for the module. To config the module, please refer to: Video Control Toolkits Manual : [[CS-MIPI-X i2c]]。 |
| | | |
Line 272: |
Line 274: |
| | | |
| Video Control Toolkits Manual : [[CS-MIPI-X i2c]] | | Video Control Toolkits Manual : [[CS-MIPI-X i2c]] |
| + | |
| + | The new version of PiOS use i2c-10. If i2c-0 doesn't work, try -b 10. |
| | | |
| ===RPI Computer Module and RPI Zero Additional Info=== | | ===RPI Computer Module and RPI Zero Additional Info=== |
| Please refer to : [[VEYE-MIPI-290/327 for Raspberry Pi#RPI Computer Module and RPI Zero Additional Info|RPI Computer Module and RPI Zero Additional Info]]. | | Please refer to : [[VEYE-MIPI-290/327 for Raspberry Pi#RPI Computer Module and RPI Zero Additional Info|RPI Computer Module and RPI Zero Additional Info]]. |