Difference between revisions of "USB firmware update app note"

From wiki_veye
Jump to navigation Jump to search
 
(2 intermediate revisions by one other user not shown)
Line 17: Line 17:
 
*Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk.
 
*Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk.
  
Upgrading
+
==== Upgrading ====
  
 
*Plug in the USB disk as shown belown when power off.
 
*Plug in the USB disk as shown belown when power off.
  
 
[[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307]]
 
[[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307]]
[[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307]]
+
[[File:CS-MIPI-IMX307 Upgrade mode new.png|alt=|center|thumb|600x600px|CS-MIPI-IMX307,CS-MIPI-SC132]]
  
 
*Power on. Notice that USB camera module using power port instead of commonly used USB port. MIPI camera module using 5V power port,disconnect  FFC line.
 
*Power on. Notice that USB camera module using power port instead of commonly used USB port. MIPI camera module using 5V power port,disconnect  FFC line.

Latest revision as of 17:14, 13 April 2022

查看中文

This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface.

1 Applicable Product models

  • CS-MIPI-IMX307
  • CS-USB-IMX307
  • CS-MIPI-SC132

2 How to upgrade camera firmware using USB disk

2.1 Prepare

  • Get the upgrade file via link,or other way. The default file name is ProductMode_Version_Releasedata.bin.
  • Formatting your Usb Disk to FAT32.(partition of U disk should <= 16GB.)
  • Rename upgrade file name to dimaging_upgrade.bin and copy to root dir of USB disk.

2.2 Upgrading

  • Plug in the USB disk as shown belown when power off.
CS-USB-IMX307
CS-MIPI-IMX307,CS-MIPI-SC132
  • Power on. Notice that USB camera module using power port instead of commonly used USB port. MIPI camera module using 5V power port,disconnect FFC line.
  • The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
  • LED keep on flickering (released before 20200510 flicker for 3 times),means upgrading OK. Power off.
  • If LED stays ON, this means upgrading failed,please check the upgrade file.