1,602
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + + − + − *CS-LVDS-IMX307 − *CS-LVDS-SC132 − *CS-USB-SC132 − + − + − + − + − + − + − + − + + − + − + − + − +
USB firmware update app note (view source)
Revision as of 17:14, 13 April 2022
, 17:14, 13 April 2022→Prepare
[[USB升级固件方法|查看中文]]
This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface.
This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface.
=== Applicable Product modles ===
===Applicable Product models===
*CS-MIPI-IMX307
*CS-MIPI-IMX307
*CS-USB-IMX307
*CS-USB-IMX307
*CS-MIPI-SC132
*CS-MIPI-SC132
=== How to upgrade camera firmware using USB disk ===
===How to upgrade camera firmware using USB disk===
==== Prepare ====
====Prepare====
* Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin.
*Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin.
* Formatting your Usb Disk to FAT32.
*Formatting your Usb Disk to FAT32.（partition of U disk should <= 16GB.）
* Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk.
*Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk.
Upgrading
==== Upgrading ====
* Plug in the USB disk as shown belown when power off.
*Plug in the USB disk as shown belown when power off.
[[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-USB-IMX307_Upgrade_mode.jpg]][[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307_Upgrade_mode.jpg]]
[[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307]]
[[File:CS-MIPI-IMX307 Upgrade mode new.png|alt=|center|thumb|600x600px|CS-MIPI-IMX307，CS-MIPI-SC132]]
* Power on. Notice that USB camera modules using power port instead of commonly used USB port.
*Power on. Notice that USB camera module using power port instead of commonly used USB port. MIPI camera module using 5V power port,disconnect FFC line.
* The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
*The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
* LED ON and OFF for 3 times， means upgrading OK. Power off.
*LED keep on flickering (released before 20200510 flicker for 3 times),means upgrading OK. Power off.
* If LED stays ON， this means upgrading failed，please check the upgrade file.
*If LED stays ON， this means upgrading failed，please check the upgrade file.