Line 3: |
Line 3: |
| This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface. | | This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface. |
| | | |
− | ===Applicable Product modles=== | + | ===Applicable Product models=== |
| | | |
| *CS-MIPI-IMX307 | | *CS-MIPI-IMX307 |
− | *CS-LVDS-IMX307
| |
| *CS-USB-IMX307 | | *CS-USB-IMX307 |
| *CS-MIPI-SC132 | | *CS-MIPI-SC132 |
− | *CS-LVDS-SC132
| |
− | *CS-USB-SC132
| |
| | | |
| ===How to upgrade camera firmware using USB disk=== | | ===How to upgrade camera firmware using USB disk=== |
Line 17: |
Line 14: |
| | | |
| *Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin. | | *Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin. |
− | *Formatting your Usb Disk to FAT32. | + | *Formatting your Usb Disk to FAT32.(partition of U disk should <= 16GB.) |
| *Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk. | | *Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk. |
| | | |
− | Upgrading | + | ==== Upgrading ==== |
| | | |
| *Plug in the USB disk as shown belown when power off. | | *Plug in the USB disk as shown belown when power off. |
| | | |
− | [[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-USB-IMX307_Upgrade_mode.jpg]][[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307_Upgrade_mode.jpg]] | + | [[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307]] |
| + | [[File:CS-MIPI-IMX307 Upgrade mode new.png|alt=|center|thumb|600x600px|CS-MIPI-IMX307,CS-MIPI-SC132]] |
| | | |
− | *Power on. Notice that USB camera modules using power port instead of commonly used USB port. | + | *Power on. Notice that USB camera module using power port instead of commonly used USB port. MIPI camera module using 5V power port,disconnect FFC line. |
| *The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong. | | *The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong. |
− | *LED ON and OFF for 3 times, means upgrading OK. Power off. | + | *LED keep on flickering (released before 20200510 flicker for 3 times),means upgrading OK. Power off. |
| *If LED stays ON, this means upgrading failed,please check the upgrade file. | | *If LED stays ON, this means upgrading failed,please check the upgrade file. |