Line 1: |
Line 1: |
| + | [[USB升级固件方法|查看中文]] |
| + | |
| This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface. | | This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface. |
| | | |
− | === Applicable Product modles === | + | ===Applicable Product modles=== |
| | | |
| *CS-MIPI-IMX307 | | *CS-MIPI-IMX307 |
Line 10: |
Line 12: |
| *CS-USB-SC132 | | *CS-USB-SC132 |
| | | |
− | === How to upgrade camera firmware using USB disk === | + | ===How to upgrade camera firmware using USB disk=== |
| | | |
− | ==== Prepare ==== | + | ====Prepare==== |
| | | |
− | * Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin. | + | *Get the upgrade file via [https://pan.baidu.com/s/1ri5r07ObBs1wATigTK-rag?errno=0&errmsg=Auth%20Login%20Sucess&&bduss=&ssnerror=0&traceid=#list/path=%2F link],or other way. The default file name is ProductMode_Version_Releasedata.bin. |
− | * Formatting your Usb Disk to FAT32. | + | *Formatting your Usb Disk to FAT32. |
− | * Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk. | + | *Rename upgrade file name to '''dimaging_upgrade.bin''' and copy to root dir of USB disk. |
| | | |
| Upgrading | | Upgrading |
| | | |
− | * Plug in the USB disk as shown belown when power off. | + | *Plug in the USB disk as shown belown when power off. |
| | | |
| [[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-USB-IMX307_Upgrade_mode.jpg]][[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307_Upgrade_mode.jpg]] | | [[File:CS-USB-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-USB-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-USB-IMX307_Upgrade_mode.jpg]][[File:CS-MIPI-IMX307 Upgrade mode.jpg|center|thumb|600x600px|CS-MIPI-IMX307 |link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307_Upgrade_mode.jpg]] |
| | | |
− | * Power on. Notice that USB camera modules using power port instead of commonly used USB port. | + | *Power on. Notice that USB camera modules using power port instead of commonly used USB port. |
− | * The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong. | + | *The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong. |
− | * LED ON and OFF for 3 times, means upgrading OK. Power off. | + | *LED ON and OFF for 3 times, means upgrading OK. Power off. |
− | * If LED stays ON, this means upgrading failed,please check the upgrade file. | + | *If LED stays ON, this means upgrading failed,please check the upgrade file. |