Line 103: |
Line 103: |
| | | |
| <code>sudo apt-get install gstreamer1.0-tools</code> | | <code>sudo apt-get install gstreamer1.0-tools</code> |
| + | |
| + | <code>sudo apt-get install libx264-dev libjpeg-dev</code> |
| + | |
| + | <code>sudo apt-get install libgstreamer1.0-dev \</code> |
| + | |
| + | <code> libgstreamer-plugins-base1.0-dev \</code> |
| + | |
| + | <code> libgstreamer-plugins-bad1.0-dev \</code> |
| + | |
| + | <code> gstreamer1.0-plugins-ugly \</code> |
| + | |
| + | <code> gstreamer1.0-tools \</code> |
| + | |
| + | <code> gstreamer1.0-gl \</code> |
| + | |
| + | <code> gstreamer1.0-gtk3</code> |
| | | |
| * Snap a picture (VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode) | | * Snap a picture (VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode) |
Line 127: |
Line 143: |
| | | |
| <code>gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! fpsdisplaysink video-sink=fakesink -v</code> | | <code>gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! fpsdisplaysink video-sink=fakesink -v</code> |
− |
| |
− |
| |
− | Note:
| |
− |
| |
− | The gstreamer preview now quits with an error on the bullseye version of the Raspberry Pi, we are working on it.
| |
− |
| |
| === Video Control Toolkits Manual === | | === Video Control Toolkits Manual === |
| Because of the high flexibility of our camera parameters, we do not use V4L2 parameters to control, but use scripts to configure parameters. | | Because of the high flexibility of our camera parameters, we do not use V4L2 parameters to control, but use scripts to configure parameters. |