1,602
edits
Changes
Jump to navigation
Jump to search
Line 90:
Line 90: + + + + + + + + + + + + + + + + Line 114:
Line 130: − − − Note: − − gstreamer 预览现在bullseye版本树莓派上会报错退出，我们正在解决中 −
V4L2 mode for Raspberry Pi/zh (view source)
Revision as of 13:37, 25 February 2022
, 13:37, 25 February 2022→Gstreamer应用范例
<code>sudo apt-get install gstreamer1.0-tools</code>
<code>sudo apt-get install gstreamer1.0-tools</code>
<code>sudo apt-get install libx264-dev libjpeg-dev</code>
<code>sudo apt-get install libgstreamer1.0-dev \</code>
<code> libgstreamer-plugins-base1.0-dev \</code>
<code> libgstreamer-plugins-bad1.0-dev \</code>
<code> gstreamer1.0-plugins-ugly \</code>
<code> gstreamer1.0-tools \</code>
<code> gstreamer1.0-gl \</code>
<code> gstreamer1.0-gtk3</code>
* 抓拍一张图片(VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode)
* 抓拍一张图片(VEYE-MIPI-327,CS-MIPI-IMX307 @1080p mode)
<code>gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! fpsdisplaysink video-sink=fakesink -v</code>
<code>gst-launch-1.0 v4l2src device=/dev/video0 ! "video/x-raw,format=(string)UYVY, width=(int)1920, height=(int)1080,framerate=(fraction)30/1" ! videoconvert ! fpsdisplaysink video-sink=fakesink -v</code>
=== 参数控制软件包使用 ===
=== 参数控制软件包使用 ===
由于我们的摄像头参数自由度比较高，并没有采用V4L2参数进行控制，而是使用脚本进行参数配置。
由于我们的摄像头参数自由度比较高，并没有采用V4L2参数进行控制，而是使用脚本进行参数配置。